BMW (1986-25)

Application	Year	Type	Table
iX	2022-25	D/P2, HI, KI	BMW-20
i3 (incl. i3S)	2014-22	D/P2, HI, KI, SI	BMW-11
i4	2022-24	D/P2, HI, KI, SI, WP	BMW-19
i5	2024-25	D/P2, HI, KI, SI, WP	BMW-21
i7	2023-25	D/P2, HI, KI, SI, WP	BMW-21
i8	2014-20	D/P2, HI, KI, SI	BMW-8
L7	1986-87	DS	BMW-1
M Coupe/Roadster	2007-08	D/P2, SI, KI	BMW-1
	2000-02	D/P2, SI	BMW-1
	1998-99	D/P, SI	BMW-1
M2	2022-24	D/P2, HI, KI, SI, WP	BMW-17
	2019-21	D/P2, HI, KI, SI, WP	BMW-12
	2016-18	D/P2, HI, KI, SI, WP	BMW-7
M340i	2020-23	D/P2, HI, SI, KI, WP	BMW-17
M3	2021-24	D/P2, HI, SI, KI	BMW-17
	2019	D/P2, HI, SI, KI	BMW-12
	2015-18	D/P2, HI, SI, KI	BMW-5
	2001-14	D/P2, HI, SI	BMW-2
	1998-00	D/P, SI	BMW-1
	1995-97	D/P	BMW-1
	1990-91	DS	BMW-1
M4	2021-24	D/P2, HI, SI, SI, WP	BMW-17
	2019-20	D/P2, HI, SI, KI	BMW-12
	2015-18	D/P2, HI, SI, KI	BMW-5
M5	2018-23	D/P2, HI, KI, SI, WP	BMW-17
	2009-16	D/P2, HI, KI, SI, WP	BMW-2
	2006-08	D/P2, HI, SI	BMW-2
	2000-03	D/P2, HI, SI	BMW-2
	1990-93	DS	BMW-1
M6	2012-18	D/P2, HI, KI, SI, WP	BMW-15
	2006-10	D/P2, HI, KI, SI, WP	BMW-3
M6 Gran Coupe	2014-19	D/P2, HI, KI, SI, WP	BMW-15
M8	2019	D/P2, HI, KI, SI, WP	BMW-16
X1 (incl. M35i)	2023-25	D/P2, HI, KI, SI, WP	BMW-21
	2016-22	D/P2, HI, KI, SI, WP	BMW-15
	2014-15	D/P2, HI, KI, SI, WP	BMW-5
	2012-14	D/P2, HI, SI	BMW-2
X2	2024	D/P2, HI, KI, SI	BMW-21
	2018-23	D/P2, HI,SI	BMW-15
X3 (incl. M40i)	2018-24	D/P2, HI, KI, SI, WP	BMW-17
	2013-17	D/P2, HI, KI, SI, WP	BMW-5
	2008-12	D/P2, HI, KI, SI, WP	BMW-2
	2004-07	D/P2, SI, HI	BMW-2
X3M	2020-24	D/P2, HI, KI, SI, WP	BMW-17
X4 (incl. M)	2019-25	D/P2, HI, KI, SI, WP	BMW-17
	2015-18	D/P2, HI, KI, SI, WP	BMW-5
X5 (incl. PHEV)	2019-25	D/P2, SI, HI, WP	BMW-17
	2015-18	D/P2, SI, HI, WP	BMW-5
	2008-14	D/P2, SI, HI, WP	BMW-2
	2000-07	D/P2, SI, HI	BMW-2
X5M	2020-25	D/P2, SI, HI, WP	BMW-17
	2015-18	D/P2, SI, HI, WP	BMW-5
X6 (incl. M)	2020-25	D/P2, SI, HI, WP	BMW-14
	2008-19	D/P2, SI, HI, WP	BMW-2
X7	2019-25	D/P2, SI, HI, KI	BMW-17
XM	2023-24	D/P2, SI, HI, KI, WP	BMW-17
Z3	2000-02	D/P2, SI	BMW-1
	1998-99	D/P, SI	BMW-1
	1996-97	D/P	BMW-1
Z4	2019-24	D/P2, HI, KI, SI, WP	BMW-17
	2015-16	D/P2, SI, KI, SI, WP	BMW-5
	2003-14	D/P2, SI, KI	BMW-1
Z8	2001-03	D/P2, SI	BMW-1
1 Series	2008-13	D/P2, HI, SI	BMW-6
2 Series	2022-25	D/P2, HI, KI, SI, WP	BMW-17
	2019-21	D/P2, HI, KI, SI, WP	BMW-12
	2014-18	D/P2, HI, KI, SI, WP	BMW-7
2 Series Gran Coupe	2020-24	D/P2, HI, KI, SI, WP	BMW-15
3 Series	2019-25	D/P2, HI, KI, SI, WP	BMW-17
	2015-18	D/P2, HI, KI, SI, WP	BMW-5
	2000-14	D/P2, HI, SI	BMW-2
	1998-99	D/P, HI, SI	BMW-1
	1994-97	D/P	BMW-1
	1990-93	DS	BMW-1
4 Series	2014-20	D/P2, HI, KI, SI, WP	BMW-5
4 Series Convertible	2021-24	D/P2, HI, KI, SI, WP	BMW-17
4 Series Coupe	2021-24	D/P2, HI, KI, SI, WP	BMW-17
4 Series Gran Coupe	2022-24	D/P2, HI, KI, SI, WP	BMW-17
5 Series (incl. Hybrid)	2024-25	D/P2, HI, KI, SI, WP	BMW-15
	2017-23	D/P2, HI, KI, SI, WP	BMW-17
	2015-16	D/P2, HI, KI, SI, WP	BMW-5
	2010-14	D/P2, HI, KI, SI, WP	BMW-2
	2006-09	D/P2, HI, SI, WP	BMW-2
	2000-05	D/P2, HI, SI	BMW-2
	1998-99	D/P, HI, SI	BMW-1
	1997	D/P, SI	BMW-1
	1994-95	D/P	BMW-1
	1989-93	DS	BMW-1
6 Series	2015-19	D/P2, HI, KI, SI, WP	BMW-5
	2004-14	D/P2, HI, KI, SI, WP	BMW-3
	1989	DS	BMW-1
7 Series	2023-25	D/P2, HI, KI, SI, WP	BMW-21
7 Series (incl. Hybrid)	2016-22	D/P2, HI, KI, SI, WP	BMW-17
	2002-15	D/P2, HI, KI, SI, WP	BMW-2
	2000-01	D/P2, HI, SI, KI	BMW-2
	1998-99	D/P, HI, SI	BMW-1
	1997	D/P, SI	BMW-1
	1993-96	D/P	BMW-1
	1988-92	DS	BMW-1
8 Series (incl. M)	2020-25	D/P2, HI, KI, SI, WP	BMW-18
	1993-97	D/P	BMW-1
	1991-92	DS	BMW-1

BMW-1 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed driver’s side air bag module (check components, replace as necessary) Deployed passenger’s side air bag module (if equipped, check components, replace as necessary) Deployed side air bag module (if equipped, check components, replace as necessary) Seat cover with padding (if seat mounted side air bag deployed) Deployed head air bag module (if equipped, check components, replace as necessary) Deployed knee air bag module (If, equipped, check components, replace as necessary) Seat belts (check components, replace as necessary) Any damaged restraint system components	Knee bolster Seat belts & mounting points Steering column Steering wheel Glove box Instrument panel AIR BAG warning light Wiring harness, connectors or component identified during diagnostic system check	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

BMW-2 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed driver’s side air bag module (check components including steering column, replace as necessary) Steering wheel (if driver’s side air bag deployed) Deployed passenger’s side air bag module (check components including trim panel and support tube, replace as necessary) Deployed door-mounted side air bag module, if equipped (check components including door trim panel, door in white and seat, replace as necessary) Deployed seat-mounted side air bag module, if equipped (check components including seat cover with padding, replace as necessary) Deployed whiplash protection system gas cartridge (if equipped) 1 Deployed head air bag module (check components including pillar trim and headliner, replace as necessary) Deployed knee air bag module, if equipped (check driver’s side panel, lower section of glove box, active knee protectors; replace as necessary) Passive knee protector (check driver’s side trim panels, passenger side glove box including knee protector, fastening elements; replace as necessary) Seat belts (check retractor mechanism, belt buckle tensioner, seatbelt height adjustment, anchor fitting tensioner; replace as necessary) Deployed battery safety terminal (if equipped) Any damaged restraint system components	AIR BAG warning light operation Instrument panel & support tube Door trim panel Seat and seat mechanism Knee bolster Seat belts & mounting points Seat belt pretensioners Steering column Steering wheel Wiring harness, connectors or component identified during diagnostic system check Whiplash protection system (if equipped)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1If severity of crash has not caused any other damage to seat, only triggered gas generator needs to be replaced. Cartridge may be replaced up to 5 times.

BMW-3 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed driver’s side air bag module (check components, replace as necessary) Deployed passenger’s side air bag module (check trim, instrument panel, supporting tube; replace if damaged) Deployed front and/or rear side air bag module (check seat mechanism function and screw/bolt connections, replace as necessary) Deployed whiplash protection system gas cartridge 1 Satellite (impact) sensors (if damaged or fault code set in control unit memory) Cables and plugs (if damaged) Deployed head air bag module (check A-pillar trim, B-pillar trim, C-pillar trim, refiner, connection/mounting on side frame; replace as necessary) Deployed knee air bag module (check driver’s side panel, lower section of glove box, active knee protectors; replace as necessary) Passive knee protector (check driver’s side trim panels, passenger side glove box including knee protector, fastening elements; replace as necessary) Seat belts (check retractor mechanism, belt buckle tensioner, seatbelt height adjustment, anchor fitting tensioner; replace as necessary) Any damaged restraint system components	AIR BAG warning light operation Instrument panel & support tube Knee bolster Seat belts & mounting points Seat belt pretensioners Steering column Steering wheel Wiring harness, connectors or component identified during diagnostic system check Wiring harness or connector damage (corrosion, incorrect engagement, bent pin) Whiplash protection system (if equipped)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1If severity of crash has not caused any other damage to seat, only triggered gas generator needs to be replaced. Cartridge may be replaced up to 5 times.

BMW-4 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed driver’s side air bag module (check components, replace as necessary) Steering wheel (if driver’s side air bag module deployed) Deployed passenger’s side air bag module (check components, replace as necessary) Deployed side air bag module (check components, replace as necessary) Seat cover with padding (if side air bag deployed) Deployed head air bag module (check components, replace as necessary) Seat belts (check components, replace as necessary) Deployed battery safety terminal (if equipped) Any damaged restraint system components	AIR BAG warning light operation A-pillar, B-pillar & C-pillar 1 Impact sensors and mounting points Instrument panel & support tube Headliner 1 Knee bolster Seat belts & mounting points Seat belt pretensioners Steering column Steering wheel Wiring harness, connectors or component identified during diagnostic system check	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1On coupe models, if head air bag module has deployed.

BMW-5 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed driver’s side air bag module Steering wheel (if driver’s side air bag deployed) Deployed passenger’s side air bag module (check components including trim panel and support tube, replace as necessary) Deployed front and/or rear side air bag module (check seat mechanism function and screw/bolt connections, replace as necessary) Deployed head air bag module (check components including pillar trim and headliner, replace as necessary) Deployed knee air bag module (check side panel, lower section of glove box, active knee protectors; replace as necessary) Passive knee protector (check driver’s side trim panels, passenger side glove box including knee protector, fastening elements; replace as necessary) Seat belts (check retractor mechanism, belt buckle tensioner, seatbelt height adjustment, anchor fitting tensioner; replace as necessary) Any damaged restraint system components	AIR BAG warning light operation Instrument panel & support tube Door trim panel Seat and seat mechanism Knee bolster Seat belts & mounting points Seat belt pretensioners Steering column Steering wheel Wiring harness, connectors or component identified during diagnostic system check	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

BMW-6 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed air bag modules 1 ,2 Steering wheel (if driver’s side air bag module deployed) Any damaged restraint system components	AIR BAG warning light operation A-pillar, B-pillar & C-pillar 3 Impact sensors and mounting points Instrument panel & support tube Headliner Knee bolster Seat belts & mounting points Seat belt pretensioners Steering column Steering wheel Wiring harness, connectors or component identified during diagnostic system check	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1If side air bag deployed, replace air bag module and seat cover with upholstery. Replace gas generator of active head restraint (up to 5 replacements). 2Replace steering wheel if driver’s side air bag module deployed. 3On coupe models, if head air bag module has deployed.

BMW-7 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed driver’s side air bag module Steering wheel (if driver’s side air bag module deployed) Deployed passenger’s side air bag module (check components including trim panel and support tube, replace as necessary) Deployed knee air bag module (check trim panel, lower section of glove box, active knee protectors; replace as necessary) Deployed head air bag module (check components including pillar trim and headliner, replace as necessary) Deployed seat-mounted side air bag module (check components including seat cover with padding, replace as necessary) Seat belts (check retractor mechanism, belt buckle tensioner, seatbelt height adjustment, anchor fitting tensioner; replace as necessary) Any damaged restraint system components	AIR BAG warning light operation A-pillar, B-pillar & C-pillar Impact sensors and mounting points Instrument panel & support tube Headliner Knee bolster Seat belts & mounting points Seat belt pretensioners Steering column Steering wheel Wiring harness, connectors or component identified during diagnostic system check	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

BMW-8 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Read and record control unit fault memory, rectify faults as necessary Deployed driver’s side air bag module Steering wheel (if driver’s side air bag module deployed) Deployed passenger’s side air bag module (replace dashboard trim panel and replace support tube if damaged) Deployed knee air bag module (check trim panel, lower section of glove box, knee protectors; replace as necessary) Deployed head air bag module (check components including pillar trim and headliner, replace as necessary) Deployed seat-mounted side air bag module (check components including seat and trim panel; replace as necessary) Seat belts (check retractor mechanism, belt tensioner, belt buckle, seatbelt height adjustment, end fitting tensioner; replace as necessary) Any damaged restraint system components	Inspect visually for damage (housing, plug connections). Replace damaged components. A-pillar, B-pillar & C-pillar Impact sensors and mounting points Instrument panel & support tube Headliner Knee bolster Seat belts & mounting points Seat belt pretensioners Steering column Whiplash protection system (if equipped) Wiring harness, connectors or component identified during diagnostic system check	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. Repair only those cables which show visible signs of damage. If no visible damage can be identified, entire cable must be replaced. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

BMW-9 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Replace all components that were affected by the accident and check all others. 1	Sensor B-pillar (left/right) Sensor front door (left/right) Sensor seat, driver/passengers side Airbag control unit, vehicle interior Sensor, pedestrian protection Front sensor (engine compartment)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Inspect visually for mechanical damage (housing, plug connections). 2Replace the airbag control unit in case of visible external damage or a corresponding fault memory entry (airbag check-light is illuminated).

BMW-10 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Replace all components that were affected by the accident and check all others. 1 ,2 ,3 ,4 ,5	Sensor B-pillar (left/right) Sensor front door (left/right) Sensor seat, driver/passengers side Airbag control unit, vehicle interior Sensor, pedestrian protection Front sensor (engine compartment)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Inspect visually for mechanical damage (housing, plug connections). 2Replace the airbag control unit in case of visible external damage or a corresponding fault memory entry (airbag check-light is illuminated). 3If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 4Front passenger airbag deployment: Dashboard trim panel (must be replaced). 5If one of the following criteria is met, the seat backrest frame must be replaced; (Activated belt tensioner, Activated end fitting pretensioner, Outer cover unclipped or ripped off by a side collision, Faulty clip connection on outer cover caused by a side collision).

BMW-11 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 Active head restraint 1 ,3 Dashboard trim panel 4 Seat backrest frame (I01 models) 5 Steering wheel 6 B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Safety battery terminal 2 Seats 7 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) Steering column Dashboard trim panel support tube Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Knee protection: trim panel (drivers side) Knee protection retaining elements Glove compartment incl. knee protection (passengers side)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others 2Connect diagnostic system. Read fault memory. Rectify faults. If you cannot delete the fault memory: Replace component causing the fault. 3If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 4If front passenger airbag has deployed. 5For I01 models, if one of the following criteria is met, the backrest frame must be replaced: Activated belt tensioner, Activated end fitting pretensioner, Outer cover unclipped by a side collision, Outer cover ripped off by a side collision, Faulty clip connection on outer cover caused by a side collision. 6If driver side air bag has deployed. 7Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-12 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Safety battery terminal 2 Seats 7 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) Steering column Dashboard trim panel support tube Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Knee protection: trim panel (drivers side) Knee protection retaining elements Glove compartment incl. knee protection (passengers side)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others 2Connect diagnostic system. Read fault memory. Rectify faults. If you cannot delete the fault memory: Replace component causing the fault. 3For side air bag module deployment, replace airbag module and seat with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. For the M Sport steering wheel, replace the impact plate. 7Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-13 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel (if damaged) B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Safety battery terminal 2 Seats 9 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) Steering column Dashboard trim panel support tube Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Lower part of glove compartment Knee protection: trim panel (drivers side) Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle. Seat backrest frame 8	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Connect BMW diagnostic system. Read fault memory. Disconnect the vehicle battery and adhere to the waiting period (at least 30 seconds). Rectify faults. Reconnect the vehicle battery and adhere to the waiting period (at least 10 seconds). Delete fault memory. Switch off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as interior light, radio, etc.). Switch the ignition on (wait for at least 10 seconds). Delete fault memory. If you cannot delete the fault memory: Replace the component that is causing the fault. 3For side air bag module deployment, replace airbag module and seat with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. For the M Sport steering wheel, replace the impact plate. 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Only IO1: If one of the following criteria is met, the backrest frame must be replaced! Activated belt tensioner, Activated end fitting tensioner, Outer cover unclipped by a side collision, Outer cover ripped off by a side collision, Faulty clip connection on outer cover caused by a side collision. 9Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-14 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel (if damaged) B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Safety battery terminal 2 Seats 9 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) Sensor, pedestrian protection Steering column Dashboard trim panel support tube Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Lower part of glove compartment Knee protection: trim panel (drivers side) Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle. Seat backrest frame 8	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Connect diagnostic system. Read fault memory. Rectify faults. If you cannot delete the fault memory: Replace component causing the fault. 3For side air bag module deployment, replace airbag module and seat cover with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. For the M Sport steering wheel, replace the impact plate. 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Only IO1: If one of the following criteria is met, the backrest frame must be replaced! Activated belt tensioner, Activated end fitting tensioner, Outer cover unclipped by a side collision, Outer cover ripped off by a side collision, Faulty clip connection on outer cover caused by a side collision. 9Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-15 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel (if damaged) B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Safety battery terminal 2 Seats 9 Seat connection Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) Sensor, pedestrian protection Steering column Dashboard trim panel support tube Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Lower part of glove compartment Knee protection: trim panel (drivers side) Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle. Seat backrest frame 8	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Connect diagnostic system. Read fault memory. Rectify faults. If you cannot delete the fault memory: Replace component causing the fault. 3For side air bag module deployment, replace airbag module and seat cover with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Only IO1: If one of the following criteria is met, the backrest frame must be replaced! Activated belt tensioner, Activated end fitting tensioner, Outer cover unclipped by a side collision, Outer cover ripped off by a side collision, Faulty clip connection on outer cover caused by a side collision. 9Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-16 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel (if damaged) B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Seats 8 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) Steering column Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Lower part of glove compartment Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Connect diagnostic system. Read fault memory. Rectify faults. If you cannot delete the fault memory: Replace component causing the fault. 3For side air bag module deployment, replace airbag module and seat cover with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. Replace airbag module and seat cover with upholstery. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. Only for the M Sport steering wheel: Replacing impact plate 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-17 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel (if damaged) B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Seats 8 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) Steering column Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Lower part of glove compartment Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Inspect visually for mechanical damage (housing, plug connections). Replace damaged components. Connect BMW diagnostic system. Read fault memory. Disconnect the vehicle battery and adhere to the waiting period (at least 30 seconds). Rectify faults. Reconnect the vehicle battery and adhere to the waiting period (at least 10 seconds). Delete fault memory. Switch off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as interior light, radio, etc.). Switch the ignition on (wait for at least 10 seconds). Delete fault memory. If you cannot delete the fault memory: Replace the component that is causing the fault. 3For side air bag module deployment, replace airbag module and seat cover with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. Only for the M Sport steering wheel: Replacing impact plate 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-18 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel (if damaged) B-pillar cover (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables & connectors for damage Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Seats 8 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) 2 Steering column Door trim panel Door in white Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Knee airbag Lower part of glove compartment Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Front passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Inspect visually for mechanical damage (housing, plug connections). Replace damaged components. Connect BMW diagnostic system. Read fault memory. Disconnect the vehicle battery and adhere to the waiting period (at least 30 seconds). Rectify faults. Reconnect the vehicle battery and adhere to the waiting period (at least 10 seconds). Delete fault memory. Switch off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as interior light, radio, etc.). Switch the ignition on (wait for at least 10 seconds). Delete fault memory. If you cannot delete the fault memory: Replace the component that is causing the fault. 3For side air bag module deployment, replace airbag module and seat cover with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The repair work can be carried out in the vehicle with the rear panel removed. The entire system can be pushed back into its original position and the new gas generator installed. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. Only for the M Sport steering wheel: Replacing impact plate 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-19 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel (if damaged) B-pillar cover (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables & connectors for damage Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Seats 8 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) 2 Steering column Steering wheel cover Steering-wheel switch Shift paddle for automatic transmission Driver’s airbag wiring harness Door trim panel Door in white Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Knee airbag Lower part of glove compartment Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Front passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Inspect visually for mechanical damage (housing, plug connections). Replace damaged components. Connect BMW diagnostic system. Read fault memory. Disconnect the vehicle battery and adhere to the waiting period (at least 30 seconds). Rectify faults. Reconnect the vehicle battery and adhere to the waiting period (at least 10 seconds). Delete fault memory. Switch off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as interior light, radio, etc.). Switch the ignition on (wait for at least 10 seconds). Delete fault memory. If you cannot delete the fault memory: Replace the component that is causing the fault. 3For side air bag module deployment, replace airbag module and seat cover with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The repair work can be carried out in the vehicle with the rear panel removed. The entire system can be pushed back into its original position and the new gas generator installed. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. Only for the M Sport steering wheel: Replacing impact plate 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-20 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Active head restraint 4 Dashboard trim panel 5 Steering wheel 6 A-pillar trim panel B-pillar trim panel (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,7 Cables: check & connectors for damage. Front sensor (engine compartment) 2 Pedestrian protection sensor 2 HV shutdown (front center) 2 Front airbag sensor (left/right) 2 Seats 8 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) 2 Steering column ICS sensor (center) 2 Door trim panel Door in White Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Lower part of glove compartment Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Inspect visually for mechanical damage (housing, plug connections). Replace damaged components. Connect BMW diagnostic system. Read fault memory. Disconnect the vehicle battery and adhere to the waiting period (at least 30 seconds). Rectify faults. Reconnect the vehicle battery and adhere to the waiting period (at least 10 seconds). Delete fault memory. Switch off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as interior light, radio, etc.). Switch the ignition on (wait for at least 10 seconds). Delete fault memory. If you cannot delete the fault memory: Replace the component that is causing the fault. 3For side air bag module deployment, replace airbag module and seat cover with upholstery. 4If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The gas generator can be replaced up to 5 times. 5If front passenger airbag has deployed. 6If driver side air bag has deployed. 7Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 8Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery.

BMW-21 See BMW (1986-25) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 Active head restraint 3 Dashboard trim panel 4 Steering wheel 5 A-pillar trim panel (if damaged) B-pillar cover (if damaged) C-pillar trim panel (if damaged)	Additional door lock: Check for foreign object, remove it if necessary Airbag control unit, vehicle interior 1 ,2 ,6 Cables & connectors for damage Front sensor (engine compartment) 2 Pedestrian protection sensor 2 Seats 7 ,8 Sensor seat, Driver-/passengers side 2 Sensor front door (left/right) 2 Sensor B-pillar (left/right) 2 Steering column Steering wheel cover Steering-wheel switch Shift paddle for automatic transmission Driver’s airbag wiring harness Door trim panel Door in white Head airbag connection/mount (on side frame) Headliner Knee airbag Trim panel (drivers side) Knee airbag Knee protection (Driver- & passengers side) Knee airbag Lower part of glove compartment Knee protection retaining elements Glove compartment incl. knee protection (passengers side) Front passenger airbag supporting tube (if damaged) Seat belt electrically motorized reel Seat belt tensioner Seat belt height adjustment Seat belt end fitting pretensioner Seat belt buckle	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
1Replace all components that were affected by the accident and check all others. 2Inspect visually for mechanical damage (housing, plug connections). Replace damaged components. Connect BMW diagnostic system. Read fault memory. Disconnect the vehicle battery and adhere to the waiting period (at least 30 seconds). Rectify faults. Reconnect the vehicle battery and adhere to the waiting period (at least 10 seconds). Delete fault memory. Switch off ignition and wait at least 2 minutes (no consumers may be switched on during this period such as interior light, radio, etc.). Switch the ignition on (wait for at least 10 seconds). Delete fault memory. If you cannot delete the fault memory: Replace the component that is causing the fault. 3If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced. The repair work can be carried out in the vehicle with the rear panel removed. The entire system can be pushed back into its original position and the new gas generator installed. The gas generator can be replaced up to 5 times. 4If front passenger airbag has deployed. 5If driver side air bag has deployed. 6Replace airbag control unit in the following cases only: In case of visible external damage or in case of a corresponding fault memory entry (airbag check light illuminated). 7Check seats (functional check of seat mechanism), replace if necessary. Check seat connection. Replace gas generator of active head restraint. Replace airbag module and seat cover with upholstery. 8Only IO1: If one of the following criteria is met, the backrest frame must be replaced! Activated belt tensioner, Activated end fitting tensioner, Outer cover unclipped by a side collision, Outer cover ripped off by a side collision, Faulty clip connection on outer cover caused by a side collision.