Hyundai (1994-25)

Back to top
WARNING:

Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a live module. See appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.
Application Year Type Table
Accent 2018-22 D/P2, HI, SI Hyundai-19
2012-17 D/P2, HI, SI, WP Hyundai-14
2006-11 D/P2, HI, SI Hyundai-4
2003-05 D/P2, SI Hyundai-2
2001-05 D/P, SI Hyundai-1
1995-00 D/P Hyundai-1
Azera 2012-17 D/P2, HI, KI, SI Hyundai-15
2006-11 D/P2, HI, KI, SI Hyundai-5
Elantra (incl.Hybrid) 2021-25 D/P2, HI, SI Hyundai-23
Elantra 2017-20 D/P2, HI, SI Hyundai-18
2007-16 D/P2, HI, SI, WP Hyundai-6
2004-06 D/P2, SI Hyundai-2
2002-03 D/P, SI Hyundai-1
1996-01 D/P Hyundai-1
1994-95 DS Hyundai-1
Elantra N 2023-24 D/P2, HI, SI Hyundai-23
Entourage 2007-10 D/P2, HI, SI Hyundai-8
Equus 2011-16 D/P2, HI, KI, SI, WP Hyundai-11
Genesis 2009-16 D/P2, HI, SI, WP Hyundai-10
IONIC 5N 2025 D/P2, HI, SI, Hyundai-25
IONIQ Electric 2017-21 D/P2, HI, KI, SI Hyundai-17
IONIQ Hybrid 2017-22 D/P2, HI, KI, SI Hyundai-17
IONIQ Plug-in Hybrid 2018-22 D/P2, HI, KI, SI Hyundai-17
Kona (incl. EV) 2018-23 D/P2, HI, KI, SI Hyundai-21
Nexo 2019-24 D/P2, HI, SI Hyundai-22
Palisade 2020-24 D/P2, HI, KI, SI Hyundai-22
Santa Fe (inc. Plug-in, Hybrid) 2024-25 D/P2, HI, SI, WP Hyundai-26
2019-23 D/P2, HI, SI Hyundai-22
Santa Fe 2007-18 D/P2, HI, SI, WP Hyundai-7
2005-06 D/P2, SI Hyundai-3
2001-04 D/P, SI Hyundai-3
Sonata (incl. Hybrid) 2019-24 D/P2, HI, KI, SI Hyundai-22
Sonata 2015-18 D/P2, HI, KI, SI Hyundai-16
2008-14 D/P2, HI, SI, WP Hyundai-4
2006-07 D/P2, HI, SI Hyundai-4
1999-05 D/P, SI Hyundai-1
1995-98 D/P Hyundai-1
Tiburon 2003-08 D/P2, SI Hyundai-3
1997-01 D/P Hyundai-1
Tucson FCEV 2015 D/P2, HI, SI, WP Hyundai-13
Tucson 2008-21 D/P2, HI, SI, WP Hyundai-13
2005-07 D/P2, HI, SI Hyundai-2
Veloster N 2019-22 D/P2, HI, SI Hyundai-20
Veloster 2019-21 D/P2, HI, SI Hyundai-20
Veloster 2012-18 D/P2, HI, SI Hyundai-12
Venue 2020-24 D/P2, HI, SI Hyundai-24
Veracruz 2007-13 D/P2, HI, SI, WP Hyundai-9
XG300 2001 D/P, SI Hyundai-1
XG350 2002-05 D/P, SI Hyundai-1

D/P—Driver’s & Passenger’s Side D/P2—Driver’s & Passenger’s Side (Dual-Stage) DS—Driver’s Side HI—Head Impact KI—Knee Impact SI—Side Impact PS2—Passenger’s Side (Dual-Stage) WP—Whiplash Protection

Hyundai-1 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag module(s)

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners (if equipped)

  • SRSCM 1

  • Clockspring 2

  • Front impact sensor(s) 3

  • Side impact sensor 4

  • SRS wiring harness 5

  • Any damaged restraint system component

  • Clockspring

  • Passenger presence detection system (if equipped)

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following one air bag deployment or 5 seat belt pretensioner only deployments. Machine screws securing SRSCM to vehicle must also be replaced.
2Replace clockspring following driver’s side air bag module deployment.
3Following air bag module and/or seat belt pretensioner deployment, if equipped.
4On deployed side.
5Replace SRS wiring harness associated with deployed components. Consult dealer for availability.
Hyundai-2 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners (if equipped)

  • SRSCM 1

  • Clockspring 2

  • Front impact sensor(s) 3

  • Side impact sensor 4

  • Seat track assembly 5

  • Seat track position sensor 5

  • SRS wiring harness (consult dealer for availability)

  • Instrument panel 6

  • Any damaged restraint system component

  • Clockspring

  • Front impact sensor(s)

  • Passenger presence detection system (if equipped)

  • SRSCM

  • Seat belts & mounting points

  • Seat track & seat position sensors

  • Steering column

  • Steering wheel

  • SRS wiring harness

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following one air bag deployment or 5 seat belt pretensioner only deployments. Machine screws securing SRSCM to vehicle must also be replaced.
2Replace clockspring following driver’s side air bag module deployment.
3Following air bag module and/or seat belt pretensioner deployment.
4Following side impact or curtain air bag module deployment, on side of impact
5On deployed side.
6Replace instrument panel following passenger’s side air bag module deployment on 2006-10 Tucson.
Hyundai-3 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners (if equipped)

  • Instrument panel 1

  • SRSCM 2

  • Clockspring 3

  • Side impact sensor 4

  • SRS wiring harness 5

  • Front impact sensor 6

  • Any damaged restraint system component

  • Clockspring

  • Occupant Classification System

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following passenger’s side air bag module deployment, 2001-06 Santa Fe and 2003-07 Tiburon.
2SRSCM must be replaced following one air bag deployment or 6 seat belt pretensioner only deployments. Machine screws securing SRSCM to vehicle must also be replaced.
3Replace clockspring following driver’s side air bag module deployment.
4On deployed side.
5Replace SRS wiring harness associated with deployed components. Consult dealer for availability.
6Following front air bag module and/or seat belt pretensioner deployment, if equipped.
Hyundai-4 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag module(s)

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioner(s) (if equipped)

  • SRSCM 1

  • Front impact sensors 2

  • Side impact sensor 3

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 4

  • Any damaged restraint system component

  • Active head restraint 5

  • Clockspring

  • Front impact sensors

  • Occupant Classification System (Passenger presence detection system)

  • SRSCM

  • Seat belts & mounting points

  • Seat track & seat position sensors

  • Steering column

  • Steering wheel

  • SRS wiring harness

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following any air bag deployment or if DTC B1658 is retrieved after a seat belt pretensioner only deployment. Machine screws securing SRSCM to vehicle must also be replaced.
2Following front air bag module and/or seat belt pretensioner deployment.
3On side of deployment following side/head impact air bag module deployment.
4Inspect clockspring for heat damage. If any damage is found, replace clockspring.
5If equipped.
Hyundai-5 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners

  • Deployed seat belt buckle pretensioners

  • SRSCM 1

  • Front impact sensors 2

  • Side impact sensors 3

  • Seat back assembly 4

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 5

  • Any damaged restraint system component

  • Clockspring

  • Front impact sensors

  • Occupant Classification System (Passenger presence detection system)

  • SRSCM

  • Seat belts & mounting points

  • Seat track & seat position sensors

  • Steering column

  • Steering wheel

  • SRS wiring harness

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following any air bag deployment or if DTC B1658 is retrieved after a seat belt pretensioner only deployment. Machine screws securing SRSCM to vehicle must also be replaced.
2Following front air bag module and/or seat belt pretensioner deployment.
3On side of deployment following side/head impact air bag module deployment.
4Seat back assembly must be replaced after side impact air bag module has deployed.
5Replace clockspring following deployment of driver’s side air bag module.
Hyundai-6 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners/anchor pretensioners (if equipped)

  • SRSCM

  • Front Impact Sensors (FIS) 1

  • Side Impact Sensor (SIS) 2

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 3

  • Any damaged restraint system component

  • Clockspring

    Front Impact Sensor (FIS)

  • Occupant Classification System (Passenger presence detection system)

  • SRSCM

  • Seat belts & mounting points

    Seat track & seat position sensors

  • Steering column

  • Steering wheel

  • SRS wiring harness

  • Side Impact Sensors (SIS)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following air bag module and/or seat belt pretensioner deployment.
2On side of deployment following side/head impact air bag module deployment.
3Inspect clockspring for heat damage. If any damage is found, replace clockspring.
Hyundai-7 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners/anchor pretensioners (if equipped)

  • SRSCM 1

  • Side Impact Sensor (SIS) 2

  • Front Impact Sensor (FIS) 3

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 4

  • Any damaged restraint system component

  • Front seat back assembly 5

  • Clockspring

  • Occupant Classification System (Passenger presence detection system)

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Seat back cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following any air bag deployment or if DTC B1658 is retrieved after a seat belt pretensioner only deployment. Machine screws securing SRSCM to vehicle must also be replaced.
2On side of deployment following side/head impact air bag module deployment.
3Following front air bag module and/or seat belt pretensioner deployment.
4Inspect clockspring for heat damage. If any damage is found, replace clockspring.
5Side impact air bag module is only available with seat back assembly and cannot be purchased separately.
Hyundai-8 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners (if equipped)

  • SRSCM 1

  • Side Impact Sensor (SIS) 2

  • SRS wiring harnesses (consult dealer for availability)

  • Front Impact Sensor (FIS) 3

  • Clockspring 4

  • Instrument panel 5

  • Front seat back assembly 6

  • Any damaged restraint system component

  • Clockspring

  • Occupant Classification System (Passenger presence detection system)

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following one air bag module deployment or 6 seat belt pretensioner deployments or if DTC B1658 is retrieved after a seat belt pretensioner only deployment.
2On side of deployment following side/head impact air bag module deployment.
3Following front air bag module and/or seat belt pretensioner deployment.
4Inspect clockspring for heat damage. If any damage is found, replace clockspring.
5Following deployment of passenger’s side air bag module.
6Following deployment of side impact air bag module.
Hyundai-9 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners (if equipped)

  • SRSCM 1

  • Side Impact Sensor (SIS) 2

  • SRS wiring harnesses (consult dealer for availability)

  • Front Impact Sensor (FIS) 3

  • Clockspring 4

  • Front seat back assembly 5

  • Any damaged restraint system component

  • Clockspring

  • Occupant Classification System (Passenger presence detection system)

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following one air bag module deployment or 6 seat belt pretensioner deployments.
2On side of deployment following side/head impact air bag module deployment.
3Following front air bag module and/or seat belt pretensioner deployment.
4Replace clockspring following deployment of driver’s side air bag module.
5Following deployment of side impact air bag module.
Hyundai-10 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners (if equipped)

  • SRSCM 1

  • Instrument panel 2

  • Side Impact Sensors (SIS) 3

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 4

  • Front Impact Sensor (FIS) 5

  • Front seat back assembly 6

  • Rear seat back assembly 6

  • Any damaged restraint system component

  • Clockspring

  • Occupant Classification System (Passenger presence detection system)

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Inspect whiplash protection system and reset headrest as necessary.

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following air bag module deployment and/or seat belt pretensioner deployment.
2Following deployment of passenger’s side air bag module.
3On side of deployment following side/head impact air bag module deployment.
4Inspect clockspring for heat damage. If any damage is found, replace clockspring.
5Following front air bag module and/or seat belt pretensioner deployment.
6Following deployment of appropriate side impact air bag module.
Hyundai-11 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners (if equipped)

  • SRSCM 1

  • Side Impact Sensor (SIS) 2

  • SRS wiring harnesses (consult dealer for availability)

  • Front Impact Sensor (FIS) 3

  • Clockspring 4

  • Instrument panel 5

  • Front seat back assembly 6

  • Any damaged restraint system component

  • Clockspring

  • Occupant Classification System (Passenger presence detection system)

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following air bag module deployment.
2On side of deployment following side/head impact air bag module deployment.
3Following front air bag module and/or seat belt pretensioner deployment.
4Inspect clockspring for heat damage. If any damage is found, replace clockspring.
5Following deployment of passenger’s side air bag module.
6Following deployment of side impact air bag module.
Hyundai-12 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioner/anchor pretensioners

  • SRSCM 1

  • Side Impact Sensor (SIS) 2

  • SRS wiring harnesses (consult dealer for availability)

  • Front Impact Sensor (FIS) 3

  • Clockspring 4

  • Instrument panel 5

  • Front seat back assembly 6

  • Any damaged restraint system component

  • Clockspring

  • Occupant Classification System (Passenger presence detection system)

  • Seat belts & mounting points

  • SRS wiring harness

  • SRSCM

  • Steering column

  • Steering wheel

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following any air bag deployment or seat belt pretensioner/anchor pretensioner deployment.
2On side of deployment following side/head impact air bag module deployment.
3Following front air bag module and/or seat belt pretensioner deployment.
4Inspect clockspring for heat damage. If any damage is found, replace clockspring.
5Following deployment of passenger-side air bag module.
6Following deployment of side impact air bag module.
Hyundai-13 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Check for DTCs before repairing

  • SRSCM (air bag control module, replace after any deployment)

  • Deployed air bag module(s)

  • Crash pad (is damaged when passenger air bag deploys)

  • Seat belt pretensioner(s) (if front air bag(s) or side air bag(s) deployed)

  • Clockspring (if driver’s air bag deployed, check for heat damage, replace if damage is found)

  • Front impact sensors (if front air bags deployed)

  • Side impact sensor(s) (if side/curtain air bag(s) deployed)

  • Seat back assembly (if side air bag module deployed, for side deployed. Side air bag cannot be disassembled from seat back assembly)

  • SRS wiring harnesses (after any deployment, consult dealer for availability)

  • Any damaged restraint system component

  • Steering wheel

  • Steering column

  • Clockspring (inspect for heat damage)

  • Front impact sensors

  • Air bag connectors

  • SRSCM (air bag control module)

  • Seat belts & mounting points

  • SRS wiring harness

  • Side impact sensors

  • Confirm air bag system is okay

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-14 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag module(s)

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners and anchor pretensioners

  • SRSCM 1

  • Front impact sensors 2

  • Front seat back assembly 3

  • Instrument panel 4

  • Side impact sensor 5

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 6

  • Any damaged restraint system component

  • Active head restraints

  • Clockspring

  • Front impact sensors

  • Occupant Classification System (Passenger presence detection system)

  • SRSCM

  • Seat belts & mounting points

  • Seat track & seat position sensors

  • Steering column

  • Steering wheel

  • SRS wiring harness

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following any air bag deployment. Use NEW machine screws when installing SRSCM.
2Following frontal air bag module and/or seat belt pretensioner/seat belt anchor deployment.
3Following deployment of side impact air bag module.
4Following deployment of passenger-side air bag module.
5On side of deployment following side/head impact air bag module deployment.
6Inspect clockspring for heat damage. If any damage is found, replace clockspring.
Hyundai-15 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag module(s)

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners and anchor pretensioners

  • SRSCM 1

  • Front impact sensors 2

  • Front seat back assembly 3

  • Instrument panel 4

  • Side impact sensor 5

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 6

  • Any damaged restraint system component

  • Active head restraints

  • Clockspring

  • Front impact sensors

  • Occupant Classification System (Passenger presence detection system)

  • SRSCM

  • Seat belts & mounting points

  • Seat track & seat position sensors

  • Steering column

  • Steering wheel

  • SRS wiring harness

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following any air bag deployment. Use NEW machine screws when installing SRSCM.
2Following frontal air bag module and/or seat belt pretensioner/seat belt anchor deployment.
3Following deployment of side impact air bag module.
4Following deployment of passenger-side air bag module.
5Following side impact with deployment of side impact, head impact and/or seat belt pretensioner/seat belt anchor deployment.
6Inspect clockspring for heat damage. If any damage is found, replace clockspring.
Hyundai-16 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag module(s)

  • Seat belts in use at time of collision (includes buckle)

  • Deployed seat belt pretensioners and anchor pretensioners

  • SRSCM 1

  • Front impact sensors 2

  • Front seat back assembly 3

  • Instrument panel 4

  • Side impact sensor 5

  • SRS wiring harnesses (consult dealer for availability)

  • Clockspring 6

  • Any damaged restraint system component

  • Active head restraints

  • Clockspring

  • Front impact sensors

  • Occupant Classification System (Passenger presence detection system)

  • SRSCM

  • Seat belts & mounting points

  • Seat track & seat position sensors

  • Steering column

  • Steering wheel

  • SRS wiring harness

  • Side impact sensors (if equipped)

  • Instrument panel

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1SRSCM must be replaced following any air bag deployment or seat belt pretensioner/anchor pretensioner deployment. Use NEW machine screws when installing SRSCM.
2Following frontal air bag module and/or seat belt pretensioner/seat belt anchor deployment.
3Following deployment of side impact air bag module.
4Following deployment of passenger-side air bag module.
5Following side impact with deployment of side impact, head impact and/or seat belt pretensioner/seat belt anchor deployment.
6Inspect clockspring for heat damage. If any damage is found, replace clockspring.
Hyundai-17 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Check for DTCs before repairing

  • SRSCM (air bag control module, replace after any deployment)

  • Deployed air bag module(s)

  • Crash pad (is damaged when passenger air bag deploys)

  • Seat belt pretensioner(s) (if front air bag(s) or side/curtain air bag(s) deployed)

  • Emergency fastening device(s) (if front air bag(s) or side/curtain air bag(s) deployed)

  • Clockspring (if driver’s air bag deployed, check for heat damage, replace if damage is found)

  • Front impact sensors (if front air bags deployed)

  • Side impact sensor(s) (if side/curtain air bag(s) deployed)

  • Seat back assembly (if side air bag module deployed, for side deployed. Side air bag cannot be disassembled from seat back assembly)

  • SRS wiring harnesses (after any deployment, consult dealer for availability)

  • Any damaged restraint system component

  • Steering wheel

  • Steering column

  • Clockspring (inspect for heat damage)

  • Front impact sensors

  • Air bag connectors

  • SRSCM (air bag control module)

  • Seat belts & mounting points

  • SRS wiring harness

  • Side impact sensors

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-18 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Check for DTCs before repairing

  • SRSCM (air bag control module, replace after any deployment)

  • Deployed air bag module(s)

  • Crash pad (is damaged when passenger air bag deploys)

  • Seat belt pretensioner(s) (if front air bag(s) or side/curtain air bag(s) deployed)

  • Emergency fastening device(s) (if front air bag(s) or side/curtain air bag(s) deployed)

  • Clockspring (if driver’s air bag deployed, check for heat damage, replace if damage is found)

  • Front impact sensors (if front air bags deployed)

  • Side impact sensor(s) (if side/curtain air bag(s) deployed)

  • Seat back assembly (if side air bag module deployed, for side deployed. Side air bag cannot be disassembled from seat back assembly)

  • SRS wiring harnesses (after any deployment, consult dealer for availability)

  • Any damaged restraint system component

  • Steering wheel

  • Steering column

  • Clockspring (inspect for heat damage)

  • Front impact sensors

  • Air bag connectors

  • SRSCM (air bag control module)

  • Seat belts & mounting points

  • SRS wiring harness

  • Side impact sensors

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-19 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Check for DTCs before repairing

  • SRSCM

  • Deployed air bag(s)

  • Seat belt pretensioner(s) (if front air bag(s) or side/curtain air bag(s) deployed)

  • Front impact sensors (if front air bags deployed)

  • SRS wiring harnesses

  • Clock spring (if heat damage is found)

  • Side impact sensor(s) (if side/curtain air bag(s) deployed)

  • Steering wheel

  • Steering column

  • Clockspring (inspect for heat damage)

  • Front impact sensors

  • Air bag connectors

  • SRSCM (air bag control module)

  • Seat belts & mounting points

  • SRS wiring harness

  • Side impact sensors

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-20 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Check for DTCs before repairing

  • SRSCM (air bag control module, replace after any deployment)

  • Deployed air bag module(s)

  • Crash pad (is damaged when passenger air bag deploys)

  • Anchor pretensioner(s) (if front air bag (s) deployed

  • Seat belt pretensioner(s) (if front air bag(s) or side/curtain air bag(s) deployed)

  • Emergency fastening device(s) (if front air bag(s) or side/curtain air bag(s) deployed)

  • Clockspring (if driver’s air bag deployed, check for heat damage, replace if damage is found)

  • Front impact sensors (if front air bags deployed)

  • Side impact sensor(s) (if side/curtain air bag(s) deployed)

  • SRS wiring harnesses (after any deployment, consult dealer for availability)

  • Any damaged restraint system component

  • Steering wheel

  • Steering column

  • Clockspring (if driver’s air bag deployed, check for heat damage, replace if damage is found)

  • Front impact sensors

  • Air bag connectors

  • SRSCM (air bag control module)

  • Seat belts & mounting points

  • SRS wiring harness

  • Side impact sensors

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-21 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • When the front airbag(s) deployed after a collision, replace the following items: – SRSCM – Deployed airbag(s) – Seat belt pretensioner(s) – Emergency fastening device(s) – Front impact sensors – SRS wiring harnesses – Inspect clock spring, replace if damaged

  • When the side/curtain airbag(s) deployed after a collision, replace the following items: – SRSCM – Deployed airbag(s) – Side impact sensor(s) for deployed side(s) – SRS wiring harnesses – Seat belt pretensioner(s) – Emergency fastening device(s)

  • Before doing any SRS repairs, check for DTCs.

  • After the vehicle is completely repaired, confirm there are no SRS DTCs

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-22 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • When the front airbag(s) deployed after a collision, replace the following items: – SRSCM – Deployed airbag(s) – Seat belt pretensioner(s) – Front impact sensors – SRS wiring harnesses – Inspect clock spring, replace if damaged

  • When the side/curtain airbag(s) deployed after a collision, replace the following items: – SRSCM – Deployed airbag(s) – Side impact sensor(s) for deployed side(s) – SRS wiring harnesses

  • Before doing any SRS repairs, check for DTCs.

  • After the vehicle is completely repaired, confirm there are no SRS DTCs.

    Turn ignition switch on; SRS indicator should come on for about six seconds an then go off.

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-23 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • When the front airbag(s) deployed after a collision, replace the following items.

    ­SRSCM

    Deployed airbag

    Lighted seat belt pretensioner

    Lighted anchor pretensioner

    Front impact sensors

    Airbag wiring harnesses

    Inspect the clock spring for heat damage.

    If any damage found, replace the clock spring.

  • When the side/curtain airbag deployed after a collision, replace the following items.

    SRSCM

    Deployed airbag

    Side impact sensor for the deployed side

    Airbag wiring harnesses

    Lighted seat belt pretensioner

    Lighted anchor pretensioner

  • Before doing any SRS repairs, check for DTCs.

  • After the vehicle is completely repaired, confirm the SRS airbag system is OK.

    Turn ignition switch on; SRS indicator should come on for about six seconds an then go off.

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-24 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • When the front airbag(s) deployed after a collision, replace the following items:

    SRSCM

    Deployed airbag(s)

    Seat belt pretensioner(s)

    Emergency fastening device(s)

    Front impact sensors

    SRS wiring harnesses

    Inspect clock spring, replace if damaged

  • When the side/curtain airbag(s) deployed after a collision, replace the following items:

    SRSCM

    Deployed airbag(s)

    Side impact sensor(s) for deployed side(s)

    SRS wiring harnesses

    Seat belt pretensioner(s)

  • Before doing any SRS repairs, check for DTCs.

  • After the vehicle is completely repaired, confirm there are no SRS DTCs

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Hyundai-25 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • When airbag(s) deployed after a collision, replace the following items.

    ­SRSCM

    Deployed airbag(s)

    Seat belt pretensioner(s)

    Front impact sensors

    If any damage found, replace SRS wiring harnesses

    When the drivers airbag deployed, inspect clockspring for damage. If any damage found, replace the clock spring.

    Side impact sensor(s) on the deployed side(s)

    Airbag wiring harnesses

    Lighted seat belt pretensioner

    Lighted anchor pretensioner

  • Before doing any SRS repairs, check for DTCs.

  • After the vehicle is completely repaired, confirm the SRS airbag system is OK.

    Turn ignition switch on; SRS indicator should come on for about six seconds an then go off.

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged, they must be replaced.
Hyundai-26 See Hyundai (1994-25) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Pretensioners only deployed: Minor accidents can be protected only by deploying the pretensioner (belt). Need to replace deployed seat belt.

  • Pretensioner and airbag deployment: Although the accident is minor, pretensioner (belt)/airbag needs to be deployed, Need to replace deployed seat belt/airbag.

  • Check that the airbag system operates normally after repairing the vehicle.

  • Check the diagnosis trouble code (DTC) with diagnostic tool before the work related to the airbag system.

  • The airbag warning light should illuminate for 3 - 6 seconds and goes off when the IG is ON.

  • No restraint deployment: No pretensioner (belt)/airbag deployment due to minor accident. Seat belt replacement is not required.