Isuzu (1990-08)

Back to top
WARNING:

Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a live module. See appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.
Application Year Type Table
Amigo 1999-00 D/P Isuzu-2
Ascender 2005-08 D/P2, HI Isuzu-8
2003-04 D/P2, SI Isuzu-7
Axiom 2002-04 D/P Isuzu-6
Hombre 1996-00 D/P Isuzu-1
I-280 2006-06 D/P2, HI Isuzu-8
I-290 2007-08 D/P2, HI Isuzu-8
I-350 2006-07 D/P2, HI Isuzu-8
I-370 2007-08 D/P2, HI Isuzu-8
Impulse 1990-92 DS Isuzu-4
Oasis 1996-98 D/P Isuzu-5
Rodeo 1996-04 D/P Isuzu-2
1995 1/2 D/P Isuzu-2
Rodeo Sport 2001-03 D/P Isuzu-2
Stylus 1991-93 DS Isuzu-4
Trooper 1996-02 D/P Isuzu-2
1995 D/P Isuzu-3
VehiCROSS 1999-01 D/P Isuzu-2

D/P—Driver’s & Passenger’s Side D/P2—Driver’s & Passenger’s Side (Dual-Stage) DS—Driver’s Side HI—Head Impact KI—Knee Impact SI—Side Impact PS2—Passenger’s Side (Dual-Stage) WP—Whiplash Protection

Isuzu-1 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Sensors in area of accident damage

  • Any damaged restraint system component

  • Instrument panel braces

  • Instrument panel steering column reinforcement plate

  • Knee bolster

  • Seat belts & mounting points

  • Sensors in area of accident damage

  • SRS coil assembly

  • Steering column

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • Any sensor that the Diagnostic Energy Reserve Module (DERM) indicates as bad must be replaced.

  • If any components are damaged or bent, they must be replaced.

  • SRS wiring can be repaired following manufacturer’s instructions.
Isuzu-2 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Sensing & Diagnostic Module (SDM)

  • Any damaged restraint system component

  • Instrument panel braces

  • Instrument panel steering column reinforcement plate

  • Knee bolster & mounting points

  • Seat belts & mounting points

  • SRS coil assembly

  • Passenger’s Side air bag door 1

  • Steering column

  • Wiring harnesses

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt wiring harness repairs. Replace harness.
1If equipped.
Isuzu-3 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • All sensors

  • Any damaged restraint system component

  • SRS coil assembly

  • Instrument panel steering column reinforcement plate

  • Instrument panel braces

  • Knee bolsters

  • Seat belts & mounting points

  • Sensors in area of accident damage

  • Steering column

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.
Isuzu-4 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • All sensors

  • Any damaged restraint system component

  • Arming sensor

  • Coil assembly

  • Diagnostic Energy Module (DERM)

  • Forward sensor

  • Instrument panel steering column reinforcement plate

  • Knee pad

  • Passenger compartment sensor

  • Steering column

  • Wiring harness & brackets

  • Seat belts & mounting points

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.
Isuzu-5 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Deployed seat belt pretensioners (if equipped)

  • SRS control unit

  • Any damaged restraint system component

  • Cable reel

  • Dash sensors (1991-94)

  • Seat belts & mounting points

  • SRS control unit

  • SRS wiring harnesses

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.

  • After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
Isuzu-6 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Sensing & Diagnostic Module (SDM)

  • Any damaged restraint system component

  • Air bag modules

  • SRS coil assembly

  • SRS wiring harnesses

  • Steering wheel

  • Steering column

  • Knee bolster & mounting points

  • Instrument panel steering column reinforcement plate

  • Instrument panel braces & mounting points

  • Driver & passenger seats

  • Seat belts & mounting points

  • SDM

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
Isuzu-7 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • SRS coil assembly

  • Electronic Frontal Sensors (EFS) 1

  • Side Impact Sensors (SIS) 2

  • Sensing & Diagnostic Module (SDM)

  • Any damaged restraint system component

  • Air bag modules

  • SRS coil assembly

  • SRS wiring harnesses

  • Steering wheel

  • Steering column

  • Knee bolster & mounting points

  • Instrument panel cross car beam

  • Instrument panel braces & mounting points

  • Driver & passenger seats & mounting points

  • Seat belts & mounting points

  • SDM

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following frontal air bag deployment.
2Following deployment of side impact air bag module, on side of impact.
Isuzu-8 See Isuzu (1990-08) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Deployed seat belt pretensioners 1

  • Electronic Frontal Sensors (EFS) 2

  • Sensing & Diagnostic Module (SDM)

  • Side Impact Sensors (SIS) 3

  • SIR coil assembly 2

  • Any damaged restraint system component

  • Air bag modules

  • SIR coil assembly

  • SRS wiring harnesses

  • Steering wheel

  • Steering column

  • Passenger Presence System (PPS) & lower seat assembly 4

  • Knee bolster & mounting points

  • Roof rail and head impact air bag module mounting points

  • Instrument panel braces & mounting points

  • Driver & passenger seats & mounting points

  • Seat belts & mounting points

  • SDM

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
1Following frontal air bag deployment or on side of impact following side impact.
2Following frontal air bag deployment.
3Following deployment of head impact air bag module, on side of impact.
4If equipped.