Mitsubishi (1990-25)
WARNING: |
Accidental air bag deployment is possible. Personal
injury may result. Avoid area near steering wheel and instrument
panel even if air bags have deployed. Dual-stage air bag modules
may be present that could contain an undeployed stage. When disposing
of a deployed dual-stage air bag, always treat it as a |
Application | Year | Type | Table |
Diamante | 1999-04 | D/P | Mitsubishi-6 |
1997-98 | D/P | Mitsubishi-2 | |
1994-96 | D/P | Mitsubishi-3 | |
1992-93 | DS | Mitsubishi-3 | |
Eclipse | 2006-12 | D/P2, HI, SI | Mitsubishi-12 |
2000-05 | D/P, SI | Mitsubishi-1 | |
1996-99 | D/P | Mitsubishi-2 | |
1995 | D/P | Mitsubishi-4 | |
Eclipse Cross | 2022-24 | D/P2, HI, SI, KI | Mitsubishi-25 |
2018-20 | D/P2, HI, SI, KI | Mitsubishi-25 | |
Endeavor | 2007-11 | D/P2, HI, SI | Mitsubishi-23 |
2004-06 | D/P2, SI | Mitsubishi-23 | |
2004 | D/P, SI | Mitsubishi-10 | |
Expo | 1994-95 | DS | Mitsubishi-2 |
Galant | 2007-12 | D/P2, HI, SI | Mitsubishi-9 |
2004-06 | D/P2, SI | Mitsubishi-9 | |
1999-03 | D/P, SI | Mitsubishi-1 | |
1997-98 | D/P | Mitsubishi-2 | |
1994-96 | D/P | Mitsubishi-3 | |
i-MiEV | 2016-17 | D/P2, HI, SI, | Mitsubishi-22 |
2012-14 | D/P2, HI, SI, | Mitsubishi-18 | |
Lancer | 2016-17 | D/P2, HI, KI, SI | Mitsubishi-21 |
2008-15 | D/P2, HI, KI, SI | Mitsubishi-15 | |
2002-07 | D/P, SI | Mitsubishi-7 | |
Lancer Evolution | 2016 | D/P2, HI, KI, SI | Mitsubishi-21 |
2008-15 | D/P2, HI, KI, SI | Mitsubishi-15 | |
2003-06 | D/P | Mitsubishi-7 | |
Lancer Sportback | 2009-14 | D/P2, HI, KI, SI | Mitsubishi-16 |
2004-06 | D/P, SI | Mitsubishi-7 | |
Mirage | 2017-24 | D/P2, HI, KI, SI | Mitsubishi-24 |
2014-15 | D/P2, HI, KI, SI | Mitsubishi-19 | |
2000-02 | D/P | Mitsubishi-6 | |
1997-99 | D/P | Mitsubishi-2 | |
1995-96 | D/P | Mitsubishi-5 | |
1994 | DS | Mitsubishi-5 | |
Mirage G4 | 2017-24 | D/P2, HI, KI, SI | Mitsubishi-24 |
Montero | 2002-06 | D/P, SI | Mitsubishi-7 |
2001 | D/P, SI | Mitsubishi-3 | |
1996-00 | D/P | Mitsubishi-3 | |
1994-95 | DS | Mitsubishi-3 | |
Montero Sport | 1997-04 | D/P | Mitsubishi-3 |
Outlander | 2022-24 | D/P2, HI, KI, SI, WP | Mitsubishi-26 |
2014-20 | D/P2, HI, KI, SI | Mitsubishi-20 | |
2007-13 | D/P2, HI, SI | Mitsubishi-14 | |
Outlander PHEV | 2023-24 | D/P2, HI, KI, SI, WP | Mitsubishi-26 |
2018-22 | D/P2, HI, KI, SI | Mitsubishi-20 | |
Outlander Sport | 2011-24 | D/P2, HI, KI, SI | Mitsubishi-17 |
2005-06 | D/P2, SI | Mitsubishi-11 | |
2003-04 | D/P, SI | Mitsubishi-8 | |
Raider | 2006-09 | D/P2, HI | Mitsubishi-13 |
RVR | 2011-24 | D/P2, HI, KI, SI | Mitsubishi-17 |
Sigma | 1990 | DS | Mitsubishi-4 |
3000GT | 1997-99 | D/P | Mitsubishi-2 |
1994-96 | D/P | Mitsubishi-3 | |
1991-93 | DS | Mitsubishi-3 | |
D/P—Driver’s & Passenger’s Side D/P2—Driver’s & Passenger’s Side (Dual-Stage) DS—Driver’s Side HI—Head Impact KI—Knee Impact SI—Side Impact PS2—Passenger’s Side (Dual-Stage) WP—Whiplash Protection
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
1If equipped.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
12001-02 Montero only.
2If side air bags deployed.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1If equipped.
2On side of impact, if side air bags deployed.
3Lancer Evolution.
4Lancer & Lancer Sportback, if side
air bags deploy.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1Following deployment of driver’s
side and passenger’s side air bag modules.
2On side of impact, if side air bags deployed.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1Following deployment of driver’s
side and passenger’s side air bag modules.
2On side of impact, if side or curtain air
bag modules have deployed. 2007 Galant is equipped with front and
rear side impact sensors.
3Replace passenger’s side front
seat and front seat slide adjuster following passenger’s
side air bag deployment. Replace appropriate front seat assembly
following side impact air bag module deployment.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1On side of impact. If side
air bag and curtain air bag module deployed, replace front and rear
side impact sensors. If just curtain air bag deployed, replace rear
side impact sensor (if equipped).
2Replace if front air bag, side air bag and/or
curtain air bag module deployed,
3Replace if side air bag and curtain air
bag module deployed, on side of deployment. Do not replace if just
curtain air bag deployed.
4On models with dual stage air bag modules.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1Following deployment of passenger’s
side air bag module.
2Following deployment of frontal air bag
modules.
3On side of impact, if side air bags deployed.
4Replace appropriate seat assembly if side
impact air bag module has deployed.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1When front air bags deploy,
replace the following parts with new ones: SRS-ECU, air bag modules.
seat belt with pretensioner, passenger-side slide adjuster, and front
impact sensors. Check the following parts and replace if there are
any malfunctions: clock spring, seat slide sensor, passenger-side
slide adjuster, seat belt switch, and steering wheel, steering column
shaft assembly. Inspect the wiring harnesses for binding, the connectors
for damage, poor connections, and the terminals for deformation.
2When side air bags deploy, replace the following
parts with new ones: SRS-ECU, side impact sensors, seatback assembly,
and curtain air bag modules. Inspect the wiring harnesses for binding,
the connectors for damage, poor connections, and the terminals for
deformation.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
1Following frontal impact
and air bag module or seat belt pretensioner deployment.
2Following side impact air bag module deployment,
replace front & rear sensors. Following a curtain air bag
module deployment, replace rear side impact sensor.
3Replace seat back assembly following side
impact air bag module deployment.
4Replace seat cushion frame assembly following
side impact air bag module or a curtain air bag module deployment.
5Following frontal impact and air bag module
deployment.
6Following deployment of passenger’s
side air bag module.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1When front air bags deploy
in a collision, replace the following parts with new ones: SRS-ECU,
drivers air bag module, passenger (front) air bag module, knee air bag
module, seat belt with pre-tensioner, front impact sensors, instrument
trim assembly, and front passenger’s seat cushion frame
assembly (Occupant classification-ECU and weight sensor).
2When side and curtain air bags deploy in
a collision, replace the following parts with new ones: SRS-ECU,
front seatback assembly, curtain air bag module, side impact sensor
(front and rear), headlining, front pillar trim, center pillar trim
upper, quarter trim upper, and seat belt with pre-tensioner.
3When curtain air bags deploy in a collision,
replace the following parts with new ones: SRS-ECU, side impact
sensors (rear), front passenger seat cushion frame assembly (Occupant
classification-ECU and weight sensor), curtain air bag module and
seat belt with pre-tensioner.
4When curtain air bags and seat belt pre-tensioners
deploy in a collision, replace the following parts with new ones:
SRS-ECU, side impact sensors (rear), front passenger seat cushion
frame assembly (Occupant classification-ECU and weight sensor) and
seat belt with pre-tensioner.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1Following driver’s,
front passenger’s, knee air bags and seat belt with pre-tensioner
deployment replace the following parts with new ones: SRS-ECU, driver’s
air bag module, passenger’s (front) air bag module, knee
air bag module, seat belt with pre-tensioner, front impact sensor
and front seat cushion frame assembly (occupant classification-ECU
and seat slide sensor). Check the following parts, if there is any
abnormality replace them with new parts: clock spring, seat belt switch,
steering wheel and column assembly. Check the wiring harness for
binding, the connector for damage, and the terminal for deformation.
2When side and curtain air bags deploy replace
the following parts with new ones: SRS-ECU, front seatback assembly,
curtain air bag module, and side impact sensor (front). Check the
headliner, front pillar trim, center pillar trim upper, and quarter
trim upper, if there is an abnormality, replace with new parts.
Check the wiring harness for binding, the connector for damage,
and the terminal for deformation.
3When curtain air bags deploy, replace the
following parts with new ones: SRS-ECU, side impact sensors (rear),
and curtain air bag module. Check the headliner and quarter trim
upper if there is an abnormality, replace with new ones. Check the
wiring harness for binding, the connector for damage, and the terminal
for deformation.
4When curtain air bags deploy and seat belt
pre-tensioners operate, replace the following parts with new ones:
SRS-ECU, seat belt with pre-tensioner and curtain air bag module.
Check the wiring harness for binding, the connector for damage,
and the terminal for deformation.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1When driver’s and
front passenger’s air bags deploy in a collision, replace
SRS-ECU, driver’s air bag modules, passenger’s
air bag module, seat belt with pre-tensioner, front impact sensors
and instrument panel. Inspect the clock spring, steering wheel,
steering column shaft assembly and replace if there are any malfunctions.
Check the wiring harness for binding, the connector for damage,
and the terminal for deformation.
2When side and curtain air bags deploy in
a collision, replace SRS-ECU, front seatback frame and front seatback
cover, curtain air bag module, side impact sensor, headlining, front
pillar trim, center pillar trim upper, quarter trim upper, and seat
belt with pre-tensioner. Inspect the wiring harnesses for binding,
the connectors for damage, poor connections, and the terminals for
deformation.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
1When front air bags deploy
in a collision, replace SRS-ECU, air bag modules, seat belt with
pre-tensioner, passenger-side seat adjuster, front impact sensors
and instrument panel. Inspect the clock spring, seat slide sensor,
seat belt switch, steering wheel, steering column shaft assembly
and replace if there are any malfunctions.
2When side and curtain air bags deploy in
a collision, replace SRS-ECU, curtain air bag modules, side impact
sensors, front seatback assembly and seat adjuster (passenger’s
side). Inspect the wiring harnesses for binding, the connectors
for damage, poor connections, and the terminals for deformation.
3When curtain air bags deploy, replace SRS-ECU,
side impact sensors (rear), passenger side seat adjuster and curtain
modules. Inspect the wiring harnesses for binding, the connectors
for damage, poor connections, and the terminals for deformation.
4When curtain air bags deploy and seat belt
pre-tensioners operate in a collision, replace SRS-ECU, side impact
sensors (rear), passenger side seat adjuster, curtain air bag modules,
seat belt with pre-tensioner. Inspect the wiring harnesses for binding,
the connectors for damage, poor connections, and the terminals for deformation.
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments |
|
|
|
Replace after Deployment | Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) | Comments | |||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
1Install with new fasteners.
2If any of the front air bags or seat belt
pre-tensioners* have been activated: REPLACE the crash
zone sensor and bracket with new fasteners. Confirm seat belt pre-tensioner
activation using M.U.T.-III SE only. If frontal collision without
SRS activation: Remove the crash zone sensor. Check harness connectors
for damage, terminals for deformities, and harness for binding.
Check for visible signs of damage (dents, cracks, deformation) of
the crash zone sensor and bracket. Install the crash zone sensor
to check fit. If no damage is found, reinstall with new fasteners.
If damaged - REPLACE the crash zone sensor and bracket with new
fasteners.
3If damaged - REPLACE the damaged harness.
Do not attempt to repair, splice or modify any SRS harness.
4If the front passenger air bag and/or
knee air bag has deployed, REPLACE the instrument panel assembly.
(integrated type). If the passenger front air bag has not deployed:
Visually check instrument panel for damage. If no damage is found,
reinstall the instrument panel. If damaged, REPLACE the instrument
panel assembly.
5REPLACE the seat belt pre-tensioner assembly.
Install with new fasteners. If either the driver or passenger seat
belt pre-tensioner* has been activated, REPLACE all seat
belt pre-tensioner assemblies with new fasteners. Confirm seat belt
pre-tensioner activation using M.U.T.-III SE only.
6Remove passenger seat assembly. Check control
unit case for dents, cracks of deformities. Check connectors for
damage and terminals for deformities. Check seat frame and cushion
pan for dents or deformities. If no damage is found, reinstall seat
with new fasteners. If damaged - REPLACE seat cushion assembly with new
fasteners. Perform zero point reset function after front passenger
seat is installed in the vehicle and all bolts are tightened to
specification.
7For front seat side airbag LH activation,
replace front seatback assembly LH. For front seat side airbag RH
or center activation, replace front seatback assembly RH. For curtain
airbag activation, install with new fasteners.
8For rear side seat airbag activation, replace
the rear seatback assembly.
9If a frontal air bag has not been activated
in a frontal or collision: Remove frontal air bag module. Check
harness cover and connectors for damage, terminals for deformities,
and harness for binding. Install air bag module to check fit and
alignment. If no damage is found, reinstall with new fasteners.
If damaged - REPLACE. Install air bag module with new fasteners.
10For side or rollover collision - If any
of the side SRS components have deployed, REPLACE the side air bag
(satellite) sensor on the collision side with new fasteners. If
none of the SRS components have been activated: Remove the side
air bag (satellite) sensor on the collision side. Check harness
connectors for damage, terminals for deformities, and harness for
binding. Check for visible signs of damage (dents, cracks, deformation)
of the side air bag (satellite) sensor (LH or RH). Install the side
air bag (satellite) sensor (LH or RH) to check fit. If no damage
is found, reinstall the side air bag (satellite) sensor with new
fasteners. If damaged, REPLACE the side air bag (satellite) sensor
with new fasteners.
11For side or rollover collision - If any
of the side SRS components have deployed, REPLACE the door (satellite)
sensor on the collision side with new fasteners. If none of the
SRS components have been activated: Remove the door (satellite)
sensor (LH or RH) on the collision side. Check harness connectors
for damage, terminals for deformities, and harness for binding.
Check for visible signs of damage (dents, cracks, deformation) of
the door (satellite) sensor (LH or RH). Install the door (satellite)
sensor (LH or RH) to check fit. If no damage is found, reinstall
the door (satellite) sensor (LH or RH) with new fasteners. If damaged
- REPLACE the door (satellite) sensor (LH or RH) with new fasteners.
12For side or rollover collision - Check the
center inner pillar on the collision side for damage (dents, cracks,
deformation). If damaged, REPAIR the center inner pillar.
13If the door-mounted curtain air bag module
has been deployed, REPLACE the door finisher and door-mounted curtain
air bag module. Install with new fasteners.
14If the pop-up roll bar has deployed, REPLACE
the pop-up roll bar assemblies and pop-up roll bar covers. Install
with new fasteners. If the pop-up roll bar not deployed, Check for
visible signs of damage (dents, tears, deformation, etc.) of the
pop-up roll bar. If damaged, REPLACE the pop-up roll bar with new
fasteners. Check harness and connectors for damage, and terminals
for deformities. If no damage is found, reinstall the pop-up roll
bar with new fasteners. Check for visible signs of damage (dents,
cracks, deformation, etc.) of the seatback support brace assembly.
If damaged, REPAIR the seatback support brace assembly.
15For side or rollover collision without activation:
If the door finisher assembly is damaged, the door finisher assembly & door-mounted
curtain airbag module must be replaced. Check for visible signs
of damage (dents, tears, deformation, etc.) of the door finisher
on the collision side. If damaged, REPLACE the door finisher with new
fasteners. Check for visible signs of damage (tears etc.) of the
door-mounted curtain air bag module. Check harness and connectors
for damage, and terminals for deformities. If no damage is found,
reinstall door finisher. Caution: When removing door mounted curtain
air bag module from door finisher, do not reuse door finisher. If
damaged, REPLACE the door finisher and door-mounted curtain air
bag module with new fasteners.
16For side or rollover collision: If the side
curtain air bag has not deployed: Check for visible signs of damage
(dents, tears, deformation) of the center pillar on the collision
side. If damaged, remove the side curtain air bag module on the
damage side. Check for visible signs of damage (tears etc.) of the
side curtain air bag module. Check harness and connectors for damage,
and terminals for deformities. If no damage is found, reinstall
the side curtain air bag module with new fasteners. If damaged,
REPLACE the side curtain air bag module with new fasteners.
17For side and rollover collisions: If a front
side air bag or center airbag has not deployed: Check for visible
signs of damage (dents, tears, deformation) of the seatback on the
collision side. Check harness and connectors for damage, and terminals
for deformities. If damaged - REPLACE the front seatback assembly.
18For side and rollover collision - If a rear
side air bag has not deployed: Check for visible signs of damage
(dents, tears, deformation) of the seatback on the collision side.
Check harness and connectors for damage, and terminals for deformities.
If damaged, REPLACE the rear seatback assembly.
|