Subaru (1992-24)

Back to top
WARNING:

Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a live module. See appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.
Application Year Type Table
Ascent 2019-24 D/P2, HI, SI, Subaru-23
KI
BRZ 2022-24 D/P2, HI, SI Subaru-25
2013-20 D/P2, HI, SI, Subaru-13
WP
Baja 2005-06 DS, PS2 Subaru-1
2003-04 DS, PS2, SI Subaru-1
Crosstrek (incl. Hybrid) 2024 D/P2, HI, KI, Subaru-26
SI
2018-23 D/P2, HI, KI, Subaru-22
SI
Crosstrek 2016-17 D/P2, HI, KI, Subaru-16
Forester 2019-24 D/P2, HI, KI, Subaru-23
SI, WP
2014-18 D/P2, HI, KI, Subaru-15
SI, WP
2009-13 D/P2, HI, SI, Subaru-9
WP
2006-08 D/P2, SI, Subaru-5
WP
2003-05 DS, PS2, SI Subaru-2
2001-02 D/P, SI Subaru-1
1998-00 D/P Subaru-1
Impreza 2024 D/P2,HI, KI, Subaru-26
SI
2014-23 D/P2,HI, KI, Subaru-16
SI, WP
2012-13 D/P2,HI, KI, Subaru-14
SI, WP
2008-11 D/P2,HI, SI, Subaru-10
WP
2006-07 D/P2, SI, Subaru-6
WP
2004-05 D/P, SI Subaru-2
2002-03 D/P, SI Subaru-1
1994-01 D/P Subaru-1
1993 DS Subaru-1
Legacy 2020-24 D/P2, HI, SI Subaru-24
2015-19 D/P2, HI, SI Subaru-19
2013-14 D/P2, HI, SI, Subaru-17
WP
2008-12 D/P2, HI, SI, Subaru-8
WP
2006-07 D/P2, HI, SI, Subaru-7
WP
2005 D/P2, HI, SI, Subaru-3
WP
2001-04 DS, PS2, SI Subaru-1
2000 D/P, SI Subaru-1
1995-99 D/P Subaru-1
1992-94 DS Subaru-1
Outback 2020-24 D/P2, HI, SI Subaru-24
2015-19 D/P2, HI, SI Subaru-19
2013-14 D/P2, HI, SI, Subaru-17
WP
2008-12 D/P2, HI, SI, Subaru-8
WP
2006-07 D/P2, HI, SI, Subaru-7
WP
2005 D/P2, HI, SI, Subaru-3
WP
2001-04 DS, PS2,SI Subaru-1
2000 D/P, SI Subaru-1
Solterra 2023-24 D/P2, HI, KI, Subaru-29
SI
SVX 1994-97 D/P Subaru-1
1992-93 DS Subaru-1
Tribeca 2013-14 D/P2, HI, SI, Subaru-18
WP
2011-12 D/P2, HI, SI, Subaru-12
WP
2008-10 D/P2, HI, SI, Subaru-11
WP
2006-07 D/P2, HI, SI, Subaru-4
WP
WRX 2023-24 D/P2,HI, KI, Subaru-28
SI
WRX 2022 D/P2,HI, KI, Subaru-27
SI
2015-21 D/P2,HI, KI, Subaru-20
SI
2008-14 D/P2,HI, SI, Subaru-10
WP
SI, WP
XV Crosstrek 2014-15 D/P2, HI, KI, Subaru-16
SI, WP
2013 D/P2, HI, KI, Subaru-14
SI, WP

D/P—Driver’s & Passenger’s Side D/P2—Driver’s & Passenger’s Side (Dual-Stage) DS—Driver’s Side HI—Head Impact KI—Knee Impact SI—Side Impact PS2—Passenger’s Side (Dual-Stage) WP—Whiplash Protection

Subaru-1 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Air bag control module

  • Front impact sensors 1

  • Side air bag sensors 1, 2

  • Front seat assembly (if side air bag is deployed) 1,2

  • Deployed seat belt pretensioners (if equipped)

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat belts & mounting points

  • Side air bag sensors 1

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
1If equipped.
2On side of deployment.
Subaru-2 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed air bag modules

  • Air bag control module with new bolts/nuts

  • Clockspring (roll connector)

  • Front impact sensors with new bolts/nuts

  • Side air bag sensors with new bolts/nuts (on side of impact)

  • Front seat backrest frame assembly, pad and cover (on side of deployment)

  • Deployed seat belt pretensioners

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat belts & mounting points

    Side air bag sensors

  • Whiplash protection system pendulum function (if equipped)

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
Subaru-3 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module

  • Deployed curtain air bag module

  • Air bag control module with new bolts/nuts

  • Instrument panel (if passenger’s side air bag deployed)

  • Clockspring (roll connector) with new bolts/nuts

  • Front impact sensors with new bolts/nuts

  • Curtain air bag sensor with new bolts/nuts (on side of deployment)

  • Side air bag sensor with new bolts/nuts (on side of deployment)

  • Front seat backrest (if side air bag deployed, on side of deployment)

  • Deployed seat belt pretensioners

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-4 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module

  • Deployed curtain air bag module

  • Air bag control module with new bolts/nuts

  • Instrument panel (if passenger’s side air bag deployed)

  • Clockspring (roll connector) with new bolts/nuts

  • Front impact sensors with new bolts/nuts

  • Curtain air bag sensor with new bolts/nuts (on side of deployment)

  • Side air bag sensor with new bolts/nuts (on side of deployment)

  • Passengers seat cushion pad & frame assembly (if seat cushion frame or seat rail is deformed or cracked)

  • Front seat backrest pad, frame & cover assembly (if side air bag deployed)

  • Deployed seat belt pretensioners

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Roof trim

  • A-, B-, & C-pillar upper trim & pads

  • Curtain air bag guide

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-5 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module

  • Air bag control module with new bolts

  • Clockspring (roll connector)

  • Front impact sensors with new nuts

  • Side air bag sensors with new bolts (on side of impact)

  • Passenger’s seat cushion frame assembly (vehicles prior to VIN 733000)

  • Occupant detection system and seat cushion pad (vehicles after to VIN 733001)

  • Deployed seat belt pretensioners

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat belts & mounting points

    Side air bag sensors

  • Whiplash protection system pendulum function (if equipped)

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
Subaru-6 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Air bag control module with NEW bolts

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module

  • Seat Back (on side of deployment)

  • Clockspring (roll connector)

  • Front air bag sensors

  • Side air bag sensors (on side of deployment)

  • Deployed seat belt pretensioners

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front air bag sensors

  • Side air bag sensors

  • Seat belts & mounting points

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
Subaru-7 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module

  • Deployed curtain air bag module

  • Air bag control module with new bolts

  • Instrument panel (if passenger’s side air bag deployed)

  • Clockspring (roll connector) with new bolts

  • Front impact sensors with new bolts

  • Curtain air bag sensor with new nuts (on side of deployment)

  • Side air bag sensor with new nuts (on side of deployment)

  • Front seat backrest (if side air bag deployed, on side of deployment)

  • Passenger’s seat cushion pad & frame assembly (for front collision)

  • Deployed seat belt pretensioners

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-8 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module

  • Deployed curtain air bag module

  • Air bag control module with new bolts (for any deployment)

  • Instrument panel (if passenger’s side air bag deployed)

  • Clockspring (roll connector) with new bolts (if front air bags deployed)

  • Front impact sensors with new bolts/nuts (if front air bags deployed)

  • Curtain air bag sensor with new bolts/nuts (on side of deployment)

  • Side air bag sensor with new bolts/nuts (on side of deployment)

  • Satellite safing sensor with new bolts/nuts (if side or curtain air bags deployed, on side of deployment)

  • Satellite safing sensor mounting bracket & cover (if side or curtain air bags deployed, on side of deployment)

  • Passenger’s seat cushion pad & frame assembly (if front air bags deployed)

  • Deployed seat belt pretensioners

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-9 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module (for front collision)

  • Deployed passenger’s side air bag module (for front collision)

  • Driver & passenger seat belt pretensioners (for front and side collision)

  • Air bag control module with new bolts (for front and side collision)

  • Front sub (impact) sensors with new nuts (right & left, for front collision)

  • Roll connector (clockspring, if driver air bag deployed)

  • Passenger’s seat cushion pad & frame assembly (if passenger air bag deployed)

  • Instrument panel (for integrating with passenger’s side air bag module, if passenger air bag deployed)

  • Satellite safing sensor (for side collision)

  • Satellite safing sensor cover (if equipped, for side collision)

  • Side air bag module (operating side seat backrest)

  • Side air bag sensor with new bolts (for side collision, on operating side)

  • Curtain air bag module (for side collision, on operating side)

  • Curtain air bag sensor (for side collision, on operating side)

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front sub sensors

  • Satellite safing sensor

  • Curtain air bag sensors

  • Steering wheel

  • Steering shaft

  • Wiring harness & connectors

  • Seat belts & mounting points

  • Whiplash protection system pendulum function (if equipped)

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
Subaru-10 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module (on operating side)

  • Deployed curtain air bag module (on operating side)

  • Air bag control module (for any deployment)

  • Instrument panel (if passenger’s side air bag deployed)

  • Clockspring (roll connector, if driver air bag deployed)

  • Front impact sensors (if front air bags deployed)

  • Curtain air bag sensor (on operating side)

  • Side air bag sensor (on operating side)

  • Satellite safing sensor and cover (if side collision)

  • Passenger’s seat cushion pad & frame assembly (if front air bags deployed)

  • Front seat belt pretensioners (if front air bags deploy)

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering shaft

  • Steering wheel

  • Wiring harness & connectors

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Seat belt tension sensor

  • Whiplash protection system pendulum function

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-11 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module

  • Deployed curtain air bag module

  • Air bag control module with new bolts

  • Instrument panel (if passenger’s side air bag deployed)

  • Clockspring (roll connector) with new bolts (if front air bags deployed)

  • Front impact sensors with new bolts/nuts (if front air bags deployed)

  • Curtain air bag sensor with new bolts/nuts (on side of deployment)

  • Side air bag sensor with new bolts/nuts (on side of deployment)

  • Passenger’s seat cushion pad & frame assembly (if front air bags deployed)

  • Front seat belt pretensioners (if front air bags deployed)

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-12 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Front seat belt pretensioners (if front air bags deployed)

  • Air bag control module with new bolts (If any deployment)

  • Front impact sensors with new bolts/nuts (if front air bags deployed)

  • Clockspring (roll connector) with new bolts (if front air bags deployed)

  • Instrument panel (if passenger’s side air bag deployed)

  • Passenger’s seat cushion pad & frame assembly (if front air bags deployed)

  • Deployed side air bag module

  • Side air bag sensor with new bolts/nuts (on side of deployment)

  • Deployed curtain air bag module

  • Curtain air bag sensor with new bolts/nuts (on side of deployment)

  • Satellite safing sensor and cover

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Perform occupant detection system calibration after removing or replacing passenger seat cushion cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-13 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Driver’s side air bag module

  • Passenger’s side air bag module

  • Front seat belt pretensioner (with side air bag deployment)

  • Air bag control module

  • Front impact (sub) sensors (both sensors)

  • Clockspring (roll connector)

  • Instrument panel (integrated with passenger’s side air bag module)

  • Satellite safing sensor (on side deployment occurred)

  • Front door impact sensor (on side deployment occurred)

  • Side air bag module

  • Side air bag sensor (on side deployment occurred)

  • Curtain air bag module

  • Curtain air bag sensor (on side deployment occurred)

  • Seat back cover (on side deployment occurred)

  • Seat back pad (on side deployment occurred)

  • Roof trim panel

  • Trim panel for each pillar (on side deployment occurred)

  • Air bag modules

  • Steering column assembly

  • Air bag control module

  • Steering wheel

  • Combination switch & clockspring

  • Front impact (sub) sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Instrument panel & beam

  • Wiring harness

  • Seat back cover, seat back pad

  • Seat belt pretensioners & mounting points

  • Perform occupant detection system calibration after removing or replacing passenger seat cushion cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-14 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed knee air bag module

  • Deployed passenger’s side air bag module

  • Seat belt pretensioners (driver and passenger, if frontal or rollover collision occurred)

  • Lap seat belt pretensioner (XV model, passenger only, if frontal or roll over collision occurred)

  • Air bag control module with new bolts (If any deployment occurred)

  • Front impact (sub) sensors with new bolts/nuts (if frontal collision occurred)

  • Clockspring (roll connector) with new bolts (if frontal collision occurred)

  • Passenger’s seat cushion pad & frame assembly (if frontal collision occurred)

  • Instrument panel (because it is integrated with passenger’s side air bag module, if frontal collision occurred)

  • Satellite safing sensor and cover (if side collision occurred)

  • Deployed side air bag module

  • Side air bag sensor with new bolts/nuts (on side of deployment, if side collision occurred)

  • Front door impact sensor with new bolts/nuts (on side of deployment, if side collision occurred)

  • Deployed curtain air bag module (both sides if roll over collision occurred)

  • Curtain air bag sensor with new bolts/nuts (on side of deployment, if side collision occurred)

  • Front seat backrest pad assembly (on side of deployment, if side collision occurred)

  • Front seat backrest cover complete (on side of deployment, if side collision occurred)

  • Roof trim panel (if side collision occurred)

  • Trim panel for each pillar (on side of deployment, if side collision occurred)

  • Any damaged restraint system component

  • Air bag control module

  • Air bag modules

  • Combination switch & clockspring

  • Front impact (sub) sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Instrument panel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belt pretensioners& mounting points

  • Whiplash protection system pendulum function

  • Perform occupant detection system calibration after removing or replacing passenger seat cushion cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-15 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module (for front collision)

  • Deployed knee air bag module (for front collision)

  • Deployed passenger’s side air bag module (for front collision)

  • Driver & passenger seat belt pretensioners (for front and roll over collision)

  • Lap seat belt pretensioner (for front and roll over collision)

  • Air bag control module with new bolts (for front, side and roll over collision)

  • Front sub (impact) sensors (right & left, for front collision)

  • Roll connector (clockspring, if driver air bag deployed)

  • Passenger’s seat cushion pad & frame assembly (if passenger air bag deployed)

  • Instrument panel (for integrating with passenger’s side air bag module, if passenger air bag deployed)

  • Satellite safing sensor (for side collision)

  • Satellite safing sensor cover (for side collision)

  • Deployed side air bag module (for side collision, operating side)

  • Side air bag sensor (for side collision, on operating side)

  • Front door impact sensor (for side collision, on operating side)

  • Curtain air bag module (for side collision, on operating side)

  • Curtain air bag module (for roll over collision, replace both)

  • Curtain air bag sensor (for side collision, on operating side)

  • Front seat backrest pad assembly (for side collision, on operating side)

  • Front seat backrest cover complete (for side collision, on operating side)

  • Roof assembly trim panel (for side collision)

  • Trim panel for each pillar (for side collision, on operating side)

  • Any damaged restraint system component

  • Steering wheel and column assembly

  • Wiring harness & air bag module connectors (replace main harness if damaged)

  • Combination switch & roll connector (clockspring)

  • All sensors & sub sensors

  • All air bag modules

  • Front seat cushion, backrest, side rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function (if equipped)

  • Perform occupant detection system calibration after removing or replacing passenger seat cushion cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
Subaru-16 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed knee air bag module

  • Deployed passenger’s side air bag module

  • Curtain air bag module (if front collision, replace both sides, if deployed)

  • Seat belt pretensioners (driver and passenger, if front or rollover collision)

  • Lap seat belt pretensioner (XV model, passenger only, if front or roll over collision)

  • Air bag control module (If any deployment occurred)

  • Front impact (sub) sensors (if front collision)

  • Clockspring (roll connector, if front collision)

  • Instrument panel (for integrating with passenger’s side air bag module, if front collision)

  • Roof assembly trim panel (if front or side collision, if curtain air bag deployed)

  • Trim panel for each pillar (if front or side collision, if curtain air bag deployed)

  • Satellite safing sensor and cover (if side collision)

  • Deployed side air bag module

  • Side air bag sensor (on side of deployment, if side collision)

  • Front door impact sensor (on side of deployment, if side collision)

  • Deployed curtain air bag module (on side of deployment, if side collision)

  • Curtain air bag sensor (on side of deployment, if side collision)

  • Seat belt pretensioner (on side of deployment, if side collision)

  • Front seat backrest pad assembly (on side of deployment, if side collision)

  • Front seat backrest cover complete (on side of deployment, if side collision)

  • Deployed curtain air bag module (both sides, if roll over collision)

  • Any damaged restraint system component

  • Air bag control module

  • Air bag modules

  • Combination switch & clockspring

  • Front impact (sub) sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Instrument panel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belt pretensioners& mounting points

  • Whiplash protection system pendulum function

  • Perform occupant detection system calibration after removing or replacing passenger seat cushion cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-17 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Driver’s seat belt pretensioner (if front or side collision)

  • Driver’s lap seat belt pretensioner (if front or side collision)

  • Passenger’s seat belt pretensioner (if front or side collision)

  • Passenger’s lap seat belt pretensioner (if front or side collision)

  • Air bag control module (for any deployment)

  • Front sub sensors (both if front collision)

  • Clockspring (roll connector, if front collision)

  • Passenger’s seat cushion pad & frame assembly (if front collision)

  • Instrument panel (for integrating with passenger’s side air bag module, if front collision)

  • Curtain air bag module (if front collision, when activated)

  • Deployed side air bag module (operating side)

  • Side air bag sensor (If side collision, operating side)

  • Front door impact sensor (If side collision, operating side)

  • Curtain air bag module (if side collision, operating side)

  • Curtain air bag sensor (if side collision, operating side)

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness & connectors

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Perform occupant detection system calibration after removing or replacing passenger seat cushion cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-18 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Driver’s seat belt pretensioner (if front or roll over collision)

  • Passenger’s seat belt pretensioner (if front or roll over collision)

  • Air bag control module (any deployment)

  • Front sub sensors (if front collision)

  • Clockspring (roll connector, if front collision)

  • Instrument panel (for integrating with passenger’s side air bag module, if front collision)

  • Passenger’s seat cushion pad & frame assembly (if front collision)

  • Deployed side air bag module (operating side seat backrest)

  • Side air bag sensor (if side collision, operating side)

  • Deployed curtain air bag module (operating side if side collision, both sides if roll over collision)

  • Curtain air bag sensor (if side or roll over collision, operating side)

  • Seat belt pretensioner (if side collision, operating side)

  • Satellite safing sensor and cover (if side collision)

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Whiplash protection system pendulum function

  • Perform occupant detection system calibration after removing or replacing passenger seat cushion cover

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-19 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed passenger’s side air bag module

  • Steering column assembly (front collision)

  • Steering roll connector (front collision)

  • Deployed seat cushion air bag module

  • Driver’s seat belt pretensioner

  • Passenger’s seat belt pretensioner

  • Air bag control module (for any deployment)

  • Front sub sensors (both if front collision)

  • Instrument panel (if passenger side air bag deployed)

  • Deployed side air bag module (operating side)

  • Passenger’s seat cushion pad and frame assembly (if passenger’s seat cushion airbag is deployed)

  • Side air bag sensor (side collision, operating side)

  • Front door impact sensor (If side collision, operating side)

  • Seat belt pretensioner (collision side, if deployed)

  • Front seat backrest pad assembly (operating side)

  • Front seat backrest cover (operating side)

  • Curtain air bag module (collision side)

  • Curtain air bag sensor (collision side)

  • Trim panel - roof assembly (if curtain air bag deployed)

  • Trim panel for each pillar (if curtain air bag deployed)

  • Any damaged restraint system component

  • Air bag control module

  • Air bag module body, mounting bracket and harness connector

  • Assist rails & brackets (curtain air bag module activated)

  • Combination switch

  • Front impact sensors

  • Side air bag sensors

  • Seat belts & mounting points

  • Steering roll connector

  • Steering gearbox, universal joint ASSY & beam COMPL

  • Steering wheel

  • Wiring harness & connectors on body side that are linked to the replaced parts

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-20 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Deployed driver’s side air bag module

  • Deployed knee air bag module

  • Deployed passenger’s side air bag module

  • Deployed side air bag module (on deployment side)

  • Deployed curtain air bag module (on deployment side)

  • Air bag control module (for any deployment)

  • Instrument panel (for integrating with passenger’s side air bag module, if passenger side air bag deployed)

  • Clockspring (roll connector, if driver air bag deployed)

  • Front impact, sub, sensors (if front air bags deployed)

  • Curtain air bag sensor (on deployment side)

  • Side air bag sensor (on deployment side)

  • Front door impact sensor (on deployment side)

  • Satellite safing sensor and cover (if side collision)

  • Front seat backrest pad assembly (if side collision, on deployment side)

  • Front seat backrest cover (if side collision, on deployment side)

  • Front seat belt pretensioners (if front collision, on side collision on deployment side)

  • Passenger lap seat belt pretensioners (if front collision)

  • Headliner (if curtain air bag deployed)

  • Trim panel for each pillar (if curtain air bag deployed, in deployment side)

  • Any damaged restraint system component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors

  • Side air bag sensors

  • Curtain air bag sensors

  • Steering shaft

  • Steering wheel

  • Wiring harness & connectors

  • Seat cushion frame, backrest, seat rail & headrest

  • Seat belts & mounting points

  • Seat belt tension sensor

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-21 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Driver’s side air bag module

  • Passenger’s side air bag module

  • Knee airbag module

  • Curtain air bag module (collision side)

  • Side airbag module

  • Front impact sensor; (right / left)

  • Side impact sensor (rear wheel house front side) (collision side)

  • Side impact sensor (rear wheel house rear side) (collision side)

  • Air bag control module (for any deployment)

  • Airbag bracket (models with sunroof) (collision side)

  • Instrument panel assembly (because it is integrated with passenger’s airbag module) (if passenger’s airbag module is deployed)

  • Locking tongue (front seat) (if deployed)

  • Plate door UPR (collision side)

  • Pretensioner, lap seat belt (collision side, if deployed)

  • Pretensioner, seat belt; (front) & adaptive force limiter (right / left)

  • Seat position sensor; passenger (side impact or roll over / curtain airbag module activated)

  • Seat pad & frame assembly backrest (if side airbag module activated)

  • Seat backrest cover; front (if side airbag module activated)

  • Second row seat belt pretensioner (right / left)

  • Steering wheel assembly

  • Steering column assembly

  • Roll connector

  • Trim panel for each pillar (collision side)

  • Assist rail front and rear

  • Bracket assist rail front and rear

  • Side air bag control module

  • Side impact sensor (center pillar)

  • Cover front seat backrest

  • Seat pad assembly backrest

  • Seat frame assembly backrest

  • Seat frame assembly cushion

  • Plate door upper

  • Passenger’s seat position sensor

  • Universal joint lower

  • Universal joint upper

  • Steering gearbox

  • Beam COMPL steering

  • Passenger’s seat occupant detection system

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs. Replace wiring harness as a unit.
Subaru-22 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag control module 1,2,3

  • Driver’s airbag module 1

  • Knee airbag module 1

  • Passenger’s airbag module 1

  • Curtain airbag module (right and left / if deployed with frontal collision) 1

  • Curtain airbag module (collision side with side impact) 2,3

  • Seat belt pretensioner (right and left) 1

  • Seat belt pretensioner (collision side / if deployed) 2,3

  • Lap seat belt pretensioner (passenger’s side only) 1,2,3

  • Lap seat belt pretensioner (if deployed) 3

  • Locking tongue (front seat only) (right and left) 1

  • Locking tongue (front seat only) (if deployed) 2,3

  • Front sub sensor (right and left) 1

  • Instrument panel assembly (because it is integrated with passenger’s airbag module) (if passenger’s airbag module is deployed)

  • Steering wheel 1

  • Column assembly - steering 1

  • Roll connector 1

  • Satellite safing sensor 2,3

  • Cover - satellite safing 2,3

  • Front door impact sensor (collision side) 2,3

  • Plate - door UPR (collision side) 2,3

  • Side airbag module (collision side) 2,3

  • Side airbag sensor (collision side) 2,3

  • Curtain airbag sensor (collision side) 2,3

  • Cover COMPL - front seat backrest (collision side) 2,3

  • Pad assembly - front seat backrest (collision side) 2,3

  • Frame assembly - front seat backrest (collision side) 2,3

  • Frame assembly - front seat cushion (collision side) 2,3

  • Trim panel - roof assembly 2,3

  • Trim panel for each pillar (collision side) 2,3

  • Airbag bracket (model with sunroof) (collision side) 3

  • Any damaged airbag component

  • Air bag control module

  • Combination switch & clockspring

  • Impact sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat belts & mounting points

  • Side air bag sensors 1

  • Frame assembly - front seat backrest

  • Frame assembly - front seat cushion

  • Universal joint assembly - steering

  • Steering gearbox

  • Airbag Modules

  • Headrest assembly

  • Bushing - lock headrest

  • Seat components

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
1Frontal collision (driver’s, passenger or knee airbag module assembly activated)
2Side impact (side airbag module activated)
3Side impact or roll over (curtain airbag module activated)
Subaru-23 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag control module 1,2,3

  • Driver’s airbag module 1

  • Knee airbag module 1

  • Passenger’s airbag module 1

  • Curtain airbag module (right and left / if deployed with frontal collision) 1

  • Curtain airbag module (collision side with side impact) 2,3

  • Front seat belt pretensioner & adaptive force limiter (right and left) 1

  • Lap seat belt pretensioner (collision side / if deployed) 2,3

  • Lap seat belt pretensioner (right and left) 1

  • Locking tongue (front seat) (Right & Left) 1

  • Locking tongue (front seat & rear seat) (if deployed) 2,3

  • Front impact sensor (right and left) 1

  • Rear seat belt pretensioner (right and left outer side) 1

  • Locking tongue (rear seat) (right and left outer side) 1

  • Rear seat belt pretensioner (collision side / if deployed) 2,3

  • Locking tongue (rear seat) (if deployed) 2,3

  • Instrument panel assembly (because it is integrated with passenger’s airbag module) (if passenger’s airbag module is deployed)

  • Steering wheel 1

  • Column assembly - steering 1

  • Roll connector 1

  • Side impact sensor (under the rear center seat) 2,3

  • Plate sensor cover Side impact sensor (under the rear center seat) 2,3

  • Side impact sensor (center pillar) (collision side) 2,3

  • Side impact sensor (rear wheel house) (collision side) 2,3

  • Front door impact sensor (collision side) 2,3

  • Pad front door inner (collision side) 2,3

  • Side airbag module (collision side) 2,3

  • Side airbag sensor (collision side) 2,3

  • Curtain airbag sensor (collision side) 2,3

  • Cover front seat backrest 2,3

  • Seat pad assembly backrest 2,3

  • Seat frame assembly backrest 2,3

  • Seat frame assembly cushion 2,3

  • Trim panel - roof assembly 2,3

  • Trim panel for each pillar (collision side) 2,3

  • Airbag bracket (model with sunroof) (collision side) 3

  • Any damaged airbag component

  • Air bag control module

  • Combination switch & clockspring

  • Impact sensors

  • Steering column assembly

  • Steering wheel

  • Wiring harness

  • Seat belts & mounting points

  • Side air bag sensors 1

  • Frame assembly - front seat backrest

  • Frame assembly - front seat cushion

  • Universal joint assembly - steering

  • Steering gearbox

  • Airbag Modules

  • Headrest assembly

  • Bushing - lock headrest

  • Seat components

  • Seat position sensor (front seat) (right and left)

  • Beam COMPL steering

  • Passenger’s seat occupant detection system

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
1Frontal collision (driver’s, passenger or knee airbag module assembly activated)
2Side impact (side airbag module activated)
3Side impact or roll over (curtain airbag module activated)
Subaru-24 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag control module 1,3,5,7,9,11

  • Driver’s airbag module 1,3,5,7

  • Knee airbag module 1,3,5,7

  • Passenger’s airbag module (if deployed)

  • Instrument panel assembly (if passenger airbag module deployed)

  • Seat assembly (if side airbag module or passenger’s seat cushion airbag module deployed)

  • Seat assembly (collision side) 11

  • Curtain airbag module (right and left / if deployed)

  • Belt assembly front OUT (right and left) 1,3,5,7,9,11

  • Front seat belt pretensioner 1,3,5,7,9,11

  • Lap seat belt pretensioner (driver’s seat) 1,3,5,7,9,11

  • Locking tongue (front seat) 1,3,5,7,9,11

  • Adjuster shoulder anchor 1,3,5,7,9,11

  • Belt assembly rear OUT (right and left outer side) 1,3,5,7,9,11

  • Rear seat belt pretensioner 1,3,5,7,9,11

  • Locking tongue (rear seat) 1,3,5,7,9,11

  • Front impact sensor (right and left) 1,3,5,7

  • Steering wheel assembly 1,3,5,7

  • Column assembly - steering 1,3,5,7

  • Steering roll connector 1,3,5,7

  • Passenger’s seat occupant detection system 1,3,5,7,9,11

  • Side impact sensor (under the rear center seat) 9,11

  • Plate sensor cover Side impact sensor (under the rear center seat) 9,11

  • Side impact sensor (front door) (collision side) 9,11

  • Pad front door inner (collision side) 9,11

  • Side airbag module (collision side) 9,11

  • Side impact sensor (center pillar) (collision side) 9,11

  • Side impact sensor (rear wheel house) (collision side) 11,3

  • Trim panel sub assembly 9,11

  • Trim panel for each pillar (collision side) 9,11

  • Any damaged airbag component

  • Air bag control module 2,4,6,8,10,12

  • Driver’s airbag module 2,4,6,8

  • Knee airbag module 2,4,6,8

  • Passengers airbag module (if not deployed)

  • Instrument panel assembly (if passengers airbag module not deployed)

  • Seat assembly (Side airbag module, Seat cushion airbag module (passenger’s seat))

  • Curtain airbag module 10,12

  • Front seat belt pretensioner 2,4,6,8,10,12

  • Lap seat belt pretensioner (driver’s seat) 2,4,6,8,10,12

  • Locking tongue (front seat) 2,4,6,8,10,12

  • Adjuster shoulder anchor 2,4,6,8,10,12

  • Rear seat belt pretensioner 2,4,6,8,10,12

  • Locking tongue (rear seat) 2,4,6,8,10,12

  • Front impact sensor (right and left) 2,4,6,8

  • Passenger seat occupant detection system 2,4,6,8,10,12

  • Side impact sensor (under the rear center seat) 10,12

  • Plate sensor cover Side impact sensor (under the rear center seat) 10,12

  • Side impact sensor (front door) 10,12

  • Pad front door inner 10,12

  • Side airbag module (collision side) 10

  • Seat cushion airbag module (passenger’s seat) 2,4,6,8

  • Side impact sensor (center pillar) 10,12

  • Side impact sensor (rear wheel house) 10,12

  • Trim panel sub assembly 10,12

  • Trim panel each pillar (collision side) 10,12

  • Seat position sensor (front seat) (right and left) 12

  • Universal joint assembly - steering

  • Steering gearbox assembly

  • Steering beam complete

  • Belt assembly front INN

  • Belt assembly rear INN

  • Belt assembly rear OUT CTR

  • Harnesses and connectors on body side that are linked to the replaced parts

  • Combination switch

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
1Frontal collision (driver’s airbag module activated)
2Frontal collision (driver’s airbag module NOT activated)
3Frontal collision (knee airbag module activated)
4Frontal collision (knee airbag module NOT activated)
5Frontal collision (passenger airbag module activated)
6Frontal collision (passenger airbag module NOT activated)
7Frontal collision (seat cushion airbag module activated)
8Frontal collision (seat cushion airbag module NOT activated)
9Side impact (side airbag module activated)
10Side impact (side airbag module NOT activated)
11Side impact or roll over (curtain airbag module activated)
12Side impact or roll over (curtain airbag module NOT activated)
Subaru-25 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag control module 1,3,5,7,9

  • Driver’s airbag module 1,3,5,7

  • Knee airbag module 1,3,5,7

  • Passenger’s airbag module (if deployed)

  • Instrument panel assembly (if passenger airbag module deployed)

  • Seat assembly (if side airbag module deployed)

  • Seat assembly (collision side) 7

  • Curtain airbag module (collision side) 7,9

  • Belt assembly front OUT (right and left) 1,3,5,7,9

  • Front seat belt pretensioner 1,3,5,7,9

  • Lap seat belt pretensioner (driver’s seat) 1,3,5,7,9

  • Adjuster shoulder anchor 1,3,5,7,9

  • Front impact sensor (right and left) 1,3,5

  • Steering wheel assembly 1,3,5

  • Column assembly - steering 1,3,5

  • Steering roll connector 1,3,5

  • Passenger’s seat occupant detection system 1,3,5,7,9

  • Side impact sensor (front door) (collision side) 7,9

  • Side airbag module (collision side) 7,9

  • Side impact sensor (center pillar) (collision side) 7,9

  • Side impact sensor (rear wheel house) (collision side) 7,9

  • Trim panel roof assembly 7,9

  • Trim panel for each pillar (collision side) 7,9

  • Any damaged airbag component

  • Air bag control module. Specially inspect damage of airbag module body, mounting bracket and harness connector. 2,4,6,8

  • Driver’s airbag module 2,4,6

  • Knee airbag module 2,4,6

  • Passengers airbag module (if not deployed)

  • Instrument panel assembly (if passengers airbag module not deployed)

  • Steering wheel assembly 2,4,6

  • Column assembly steering 2,4,6

  • Seat assembly (Side airbag module, Seat cushion airbag module (passenger’s seat))

  • Curtain airbag module (collision side) 8,10

  • Front seat belt pretensioner 2,4,6,8

  • Lap seat belt pretensioner (driver’s seat) 2,4,6,8

  • Adjuster shoulder anchor 2,4,6,8

  • Front impact sensor (right and left) 2,4,6

  • Passenger seat occupant detection system 2,4,6,8

  • Side impact sensor (front door) 8,10

  • Side airbag module (collision side) 10

  • Side impact sensor (center pillar) 8,10

  • Side impact sensor (rear wheel house) 8,10

  • Trim panel roof assembly 8,10

  • Trim panel each pillar (collision side) 8,10

  • Universal joint assembly - steering

  • Steering gearbox assembly

  • Steering beam complete

  • Belt assembly front INN

  • Belt assembly front OUT (LH and RH)

  • Harnesses and connectors on body side that are linked to the replaced parts

  • Combination switch

  • Steering roll connector

  • Driver’s Seat 11

  • Passenger’s Seat 11

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.

  • When the passenger’s seat is removed (including the case that the bolts are loosened), perform [Re-zero] of the occupant detection system. When the passenger’s seat is removed (including the case that the bolts are loosened), make sure that the occupant detection system operates normally.
1Frontal collision (driver’s airbag module activated)
2Frontal collision (driver’s airbag module NOT activated)
3Frontal collision (knee airbag module activated)
4Frontal collision (knee airbag module NOT activated)
5Frontal collision (passenger airbag module activated)
6Frontal collision (passenger airbag module NOT activated)
7Side impact (side airbag module activated)
8Side impact (side airbag module NOT activated)
9Side impact or roll over (curtain airbag module activated)
10Side impact or roll over (curtain airbag module NOT activated)
11Do not remove the slide rail from the seat cushion frame. If the slide rail is removed, be sure to replace the frame assembly cushion as a whole unit. If scratches, cracks or deformation are detected, be sure to replace the frame assembly as a whole unit. Check for the following, and replace the damaged parts with new parts. Body or bracket of the belt assembly front INN is scratched, cracked or deformed. Frame assembly is cracked or deformed. Headrest assembly for deformation or play. If the seat surface is damaged or frayed, replace the cover with a new part. If the seat surface and seat heater unit are replaced, replace the hog ring and hang wire with new parts. If any damage is present in the protective cover of the side airbag module, replace the side airbag module with a new part.
Subaru-26 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag control module 1,3,4,5

  • Front impact sensor (right and left) 1

  • Driver’s airbag 1

  • Steering wheel assembly 1

  • Column assembly - steering 1

  • Steering roll connector 1

  • Passenger’s airbag (if deployed) 1

  • Instrument panel assembly (if passenger airbag module deployed) 1

  • Driver’s knee airbag 1

  • Cover LWR driver 1

  • Curtain airbag module (right and left / if deployed or rollover) 3,5

  • Trim panel roof assembly 3,5

  • Seat assembly (Side airbag/Seat cushion airbag activated) 1,3,5

  • Belt assembly front OUT (right and left) 1,3,5

  • Front seat belt pretensioner 1,3,5

  • Lap seat belt pretensioner 1,3,5

  • Locking tongue (front seat) 1,3,5

  • Adjuster shoulder anchor 1,3,5

  • Belt assembly rear OUT (right and left outer side) 1,3,5

  • Rear seat belt pretensioner 1,3,5

  • Locking tongue (rear seat) 1,3,5

  • Side impact sensor (center pillar) (collision side) 3

  • Side impact sensor (rear wheel house) (collision side) 3

  • Side impact sensor (front door) (collision side) 3

  • Pad front door inner (collision side) 3

  • Plate door 3

  • Side impact sensor (under rear seat) 3

  • Side airbag module (collision side) 5

  • Any damaged airbag component

  • Front impact sensor (right and left) 2,3,4,5

  • Driver’s airbag module 2

  • Column assembly - steering 2

  • Combination switch 1

  • Steering beam complete 1

  • Steering gearbox assembly 1

  • Steering roll connector 2

  • Steering wheel assembly 2

  • Universal joint assembly - steering 1

  • Passengers airbag module (if not deployed)

  • Instrument panel assembly (if passengers airbag module not deployed)

  • Windshield glass 1

  • Knee airbag module 2

  • Body integrated unit 2

  • Column cover assembly 1

  • Cover center side 1

  • Duct foot driver 1

  • In-vehicle sensor 1

  • Push button start switch 1

  • Curtain airbag module 2,4

  • Front door glass 1,3,4,5

  • Rear door glass 1,3,4,5

  • Trim panel roof assembly 4

  • Side airbag module (collision side) 1,2,3,4,5

  • Seat assembly (Side airbag module, Seat cushion airbag module) 2,4

  • Front or rear seat belt pretensioner 2,4

  • Lap seat belt pretensioner (driver’s seat) 2,4

  • Locking tongue (front seat) 2,4

  • Adjuster shoulder anchor 2,4

  • Rear seat belt pretensioner 2,4

  • Locking tongue (rear seat) 2,4

  • Belt assembly front INN

  • Belt assembly rear INN 3,4,5

  • Seat frame assembly cushion (crack/damage/deformation)

  • Headrest assembly (deformation/play)

  • Seat surface (damage/fray)

  • Occupant detection system (load sensor zero point deviation/sensitivity)

  • Side impact sensor (center pillar) 4,5

  • Side impact sensor (rear wheel house) 4,5

  • Side impact sensor (under the rear seat) 4,5

  • Side impact sensor (front door) 4,5

  • Pad front door inner 4,5

  • Plate door 4,5

  • Plate sensor cover Side impact sensor (under the rear center seat) 3,4,5

  • Trim panel front door and sealing cover 3,4,5

  • Harnesses and connectors on body side that are linked to the replaced parts

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.

1Frontal collision (Airbag activated)
2Frontal collision (No airbag activated)
3Side collision (Airbag activated)
4Side collision (No airbag activated)
5Roll over (Airbag activated)
Subaru-27 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag control module (any deployment)

  • Driver’s airbag module 1

  • Knee airbag module 1

  • Passenger’s airbag module (if deployed)

  • Curtain airbag module (if deployed)

  • Curtain airbag module (collision side with side impact) 3

  • Front seat belt pretensioner (right and left) 1,3,5

  • Front seat belt pretensioner (if deployed) 2,4

  • Lap seat belt pretensioner (passenger’s seat) 1,3,5

  • Lap seat belt pretensioner (if deployed) 2,4

  • Locking tongue (front seat) (right and left) 1,3,5

  • Locking tongue (front seat) (if deployed) 2,4

  • Adjuster shoulder anchor 1,3,5

  • Rear seat belt pretensioner (right & left outer side) 1,3,5

  • Locking tongue (rear seat) 1,3,5

  • Front impact sensor (LH and RH) 1

  • Side impact sensor & plate sensor cover (under the rear center seat) 3,5

  • Side impact sensor (front door) (collision side) 3,5

  • Side impact sensor (center pillar) (collision side) 3,5

  • Side impact sensor (rear wheel house) (collision side) 3,5

  • Pad front door inner (collision side) 3,5

  • Instrument panel assembly (if passenger’s airbag module is deployed)

  • Steering wheel 1

  • Column assembly - steering 1

  • Steering roll connector 1

  • Front door impact sensor (collision side) 3,4

  • Plate - door UPR (collision side) 3,4

  • Side airbag module (collision side) 3,4

  • Curtain airbag module (collision side) 3,5

  • Seat assembly (if side airbag module deployed)

  • Trim panel - roof assembly 3,5

  • Trim panel for each pillar (collision side) 3,5

  • Any damaged airbag component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors 2

  • Side impact sensor & plate sensor cover (under the rear center seat) 4

  • Side impact sensor (front door) (collision side) 4

  • Side impact sensor (center pillar) (collision side) 4

  • Side impact sensor (rear wheel house) (collision side) 4

  • Driver’s airbag module 2

  • Knee airbag module 2,6

  • Passenger’s airbag module 1,2

  • Side airbag module (collision side) 4

  • Curtain airbag module (collision side) 4,6

  • Seat assembly - Side airbag module (collision side) 4

  • Front seat belt pretensioner (right & left) 2,4,6

  • Lap seat belt pretensioner (passenger’s seat) 2,4,6

  • Adaptive force limiter 6

  • Locking tongue (front seat) (right and left) 2,4

  • Adjuster shoulder anchor 2,4

  • Rear seat belt pretensioner (right & left outer side) 2,4

  • Locking tongue (rear seat) 2,4

  • Steering gearbox assembly 1

  • Beam steering COMPL 1

  • Belt assemblies - front INN, rear INN, rear OUT CTR 1

  • Harnesses and connectors on body side that are linked to the replaced parts

  • Passenger’s seat occupant detection system 1,2,3,4,5

  • Pad front door inner (collision side) 4

  • Instrument panel assembly 1,2

  • Trim panel roof assembly 4

  • Trim panel for each pillar (collision side) 4

  • Combination switch

  • Steering roll connector

  • Driver’s seat

  • Passenger’s seat

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
1Frontal collision (driver’s, passenger or knee airbag module assembly activated)
2Frontal collision (driver’s, passenger or knee airbag module assembly not activated)
3Side impact (side or curtain airbag module activated)
4Side impact (side or curtain airbag module not activated)
5Side impact or roll over (curtain airbag module activated)
6Check the following parts equipped with the direct type connector for damage, and also check each harness for pinch and connector damage. Replace the main harness as a unit if damage is found.
Subaru-28 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag control module (any deployment)

  • Driver’s airbag module 1

  • Knee airbag module 1

  • Passenger’s airbag module (if deployed)

  • Curtain airbag module (if deployed)

  • Curtain airbag module (collision side with side impact) 3

  • Front seat belt pretensioner (right and left) 1,3,5

  • Front seat belt pretensioner (if deployed) 2,4

  • Lap seat belt pretensioner (passenger’s seat) 1,3,5

  • Lap seat belt pretensioner (if deployed) 2,4

  • Locking tongue (front seat) (right and left) 1,3,5

  • Locking tongue (front seat) (if deployed) 2,4

  • Adjuster shoulder anchor 1,3,5

  • Rear seat belt pretensioner (right & left outer side) 1,3,5

  • Locking tongue (rear seat) 1,3,5

  • Front impact sensor (LH and RH) 1

  • Side impact sensor & plate sensor cover (under the rear center seat) 3,5

  • Side impact sensor (front door) (collision side) 3,5

  • Side impact sensor (center pillar) (collision side) 3,5

  • Side impact sensor (rear wheel house) (collision side) 3,5

  • Pad front door inner (collision side) 3,5

  • Instrument panel assembly (if passenger’s airbag module is deployed)

  • Steering wheel 1

  • Column assembly - steering 1

  • Steering roll connector 1

  • Front door impact sensor (collision side) 3,4

  • Plate - door UPR (collision side) 3,4

  • Side airbag module (collision side) 3,4

  • Curtain airbag module (collision side) 3,5

  • Seat assembly (if side airbag module deployed)

  • Trim panel - roof assembly 3,5

  • Trim panel for each pillar (collision side) 3,5

  • Any damaged airbag component

  • Air bag control module

  • Combination switch & clockspring

  • Front impact sensors 2

  • Side impact sensor & plate sensor cover (under the rear center seat) 4

  • Side impact sensor (front door) (collision side) 4

  • Side impact sensor (center pillar) (collision side) 4

  • Side impact sensor (rear wheel house) (collision side) 4

  • Driver’s airbag module 2

  • Knee airbag module 2,6

  • Passenger’s airbag module 1,2

  • Side airbag module (collision side) 4

  • Curtain airbag module (collision side) 4,6

  • Seat assembly - Side airbag module (collision side) 4

  • Front seat belt pretensioner (right & left) 2,4,6

  • Lap seat belt pretensioner (passenger’s seat) 2,4,6

  • Locking tongue (front seat) (right and left) 2,4

  • Adjuster shoulder anchor 2,4

  • Rear seat belt pretensioner (right & left outer side) 2,4

  • Locking tongue (rear seat) 2,4

  • Steering gearbox assembly 1

  • Beam steering COMPL 1

  • Belt assemblies - front INN, rear INN, rear OUT CTR 1

  • Harnesses and connectors on body side that are linked to the replaced parts

  • Passenger’s seat occupant detection system 1,2,3,4,5

  • Pad front door inner (collision side) 4

  • Instrument panel assembly 1,2

  • Trim panel roof assembly 4

  • Trim panel for each pillar (collision side) 4

  • Combination switch

  • Steering roll connector

  • Driver’s seat

  • Passenger’s seat

  • Assist rail & bracket (side or rollover collision)

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If any components are damaged or bent, they must be replaced.

  • DO NOT attempt SRS wiring repairs.
1Frontal collision (driver’s, passenger or knee airbag module assembly activated)
2Frontal collision (driver’s, passenger or knee airbag module assembly not activated)
3Side impact (side or curtain airbag module activated)
4Side impact (side or curtain airbag module not activated)
5Side impact or roll over (curtain airbag module activated)
6Check the following parts equipped with the direct type connector for damage, and also check each harness for pinch and connector damage. Replace the main harness as a unit if damage is found.
Subaru-29 See Subaru (1992-24) application table
Replace after Deployment Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy) Comments

  • Airbag ECU assembly (any SRS parts have deployed) 2

  • Deployed driver’s airbag module (horn button assembly)

  • Deployed lower No. 1 instrument panel airbag assembly ,3

  • Deployed lower No. 2 instrument panel airbag assembly ,4

  • Deployed instrument panel passenger airbag assembly 5

  • Deployed curtain shield airbag assembly

  • Deployed front seat airbag assembly 6

  • Front airbag sensors 7

  • Side airbag sensors 7

  • Rear airbag sensor 7

  • Any damaged airbag component

  • Perform a diagnostic system check

  • Driver’s airbag module (horn button assembly) 1

  • Steering wheel assembly

  • lower No. 1 instrument panel airbag assembly 1,3

  • Lower No. 2 instrument panel airbag assembly 1,4

  • Instrument panel passenger airbag assembly 1,5

  • Curtain shield airbag assembly 1

  • Front seat airbag assembly 6

  • Front seat outer belt assembly 1

  • Front airbag sensors 7

  • Side airbag sensors 7

  • Rear airbag sensor 7

  • Harness and connector

  • Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

  • If there is any damage or deformation of airbag installation components or the areas they are installed to, do not attempt to repair them. Replace the damaged components with new ones.

  • DO NOT attempt SRS wiring repairs.
1Visually check for defects with component removed from the vehicle.
2Visually check for defects with component installed to the vehicle.
3If the lower No. 1 instrument airbag has deployed or any defects are found, replace the lower No. 1 instrument panel airbag assembly, No.1 instrument panel brace sub-assembly, No. 3 instrument panel brace sub-assembly, instrument panel reinforcement assembly with a new one.
4If the lower No. 2 instrument panel airbag assembly has deployed or any defects are found, replace the lower No. 2 instrument panel airbag assembly, lower instrument panel airbag bracket sub-assembly, instrument panel reinforcement assembly with a new one.
5If instrument panel passenger airbag assembly has deployed or any defects are found, replace the instrument panel passenger airbag assembly, instrument panel safety pad assembly or instrument panel reinforcement assembly with a new one.
6Visually check for defects with the front seat airbag assemblies installed to the vehicle. If any defects are found, replace the separate type front seatback pad, separate type front seatback cover or front seatback pad with cover with a new one. Visually check for defects with the front seat airbag assemblies removed from the vehicle. If any defects are found, replace the front seat airbag assembly with a new one.
7When airbags have deployed as the result of a collision, be sure to replace all airbag sensors in the damaged areas (anywhere in need of repair). Visually check the airbag sensors in undamaged areas for defects. If any defects are found or an airbag sensor has detected a major collision, replace the airbag sensor with a new one.