Suzuki (1995-13)

WARNING:

Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a live module. See appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information.

Application	Year	Type	Table
Aerio	2005-07	D/P2, SI	Suzuki-3
	2002-04	D/P	Suzuki-1
Equator	2009-12	D/P2, HI, SI	Suzuki-7
Esteem	1995-02	D/P	Suzuki-1
Forenza	2004-08	D/P2, SI	Suzuki-2
Grand Vitara	2009-13	D/P2, HI, SI	Suzuki-6
	2005-08	D/P2	Suzuki-1
	2005-06	D/P	Suzuki-1
Kizashi	2010-13	D/P2, HI, SI	Suzuki-8
Reno	2005-08	D/P2, SI	Suzuki-2
Sidekick	1996-98	D/P	Suzuki-1
SX4	2007-13	D/P2, HI, SI	Suzuki-5
Swift	1995-01	D/P	Suzuki-1
Verona	2004-06	D/P2, SI	Suzuki-2
Vitara & Grand Vitara	1999-04	D/P	Suzuki-1
XL7	2007-09	D/P2, HI	Suzuki-4
	2004-06	D/P2	Suzuki-1
	2001-05	D/P	Suzuki-1
X90	1996-98	D/P	Suzuki-1

D/P—Driver’s & Passenger’s Side D/P2—Driver’s & Passenger’s Side (Dual-Stage) DS—Driver’s Side HI—Head Impact KI—Knee Impact SI—Side Impact PS2—Passenger’s Side (Dual-Stage) WP—Whiplash Protection

Suzuki-1 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules Sensing & Diagnostic Module (SDM) Front impact sensors (if equipped) Side impact sensors (if equipped) Deployed seat belt pretensioners (if equipped) Instrument panel (if passenger air bag deployed) 1	AIR BAG warning light operation Combination switch assembly & contact coil Front impact sensors 2 Instrument panel reinforcement Knee bolsters Seat belts & mounting points SDM & SDM bracket Steering column bracket Steering column & shaft joints Steering wheel Wiring harness Air bag module(s) Sensing & Diagnostic Module (SDM)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.
12006-08 Grand Vitara. 2If equipped.

Suzuki-2 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules Clockspring Sensing & Diagnostic Module (SDM) 1 SIR wiring harness Deployed seat belt pretensioners (if equipped)	AIR BAG warning light operation Instrument panel reinforcement Knee bolsters Seat belts & mounting points SDM & SDM bracket Steering column bracket Steering column & shaft joints Steering wheel SIR wiring harness Air bag module(s) Sensing & Diagnostic Module (SDM)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.
1SDM can sustain 5 seat belt pretensioner deployments or one air bag module deployment before replacement is required.

Suzuki-3 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules Sensing & Diagnostic Module (SDM) 1 Deployed seat belt pretensioners (if equipped) Front impact sensors 2 Instrument panel 2 Side impact sensors 3	AIR BAG warning light operation Instrument panel reinforcement Knee bolsters Seat belts & mounting points Occupant Classification Module SDM & SDM bracket Steering column bracket Steering column & shaft joints Steering wheel Clockspring SIR wiring harness Air bag module(s) Sensing & Diagnostic Module (SDM)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.
1SDM can sustain 5 seat belt pretensioner deployments or one air bag module deployment before replacement is required. 2Following passenger’s side air bag module deployment. 3Following side impact air bag module deployment. Replace side impact sensor on side of deployment.

Suzuki-4 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules Sensing & Diagnostic Module (SDM) Deployed seat belt pretensioners Front impact sensors 1 Side impact sensors 2	AIR BAG warning light operation Instrument panel reinforcement Knee bolsters Seat belts & mounting points Occupant Classification Module SDM & SDM bracket Steering column bracket Steering column & shaft joints Steering wheel Clockspring SIR wiring harness Air bag module(s) Sensing & Diagnostic Module (SDM)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.
1Following frontal impact and air bag module and/or seat belt pretensioner deployment. 2Following side impact and air bag module deployment. Replace side impact sensor on side of deployment.

Suzuki-5 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules Sensing & Diagnostic Module (SDM) Deployed seat belt pretensioners Front impact sensors 1 Side impact sensors 2 Instrument panel 3 Seat position sensor 4 Passenger seat cushion including OCM with sensor mat 5	AIR BAG warning light operation Instrument panel reinforcement Seat belts & mounting points Seat belt buckle switches Seat position sensor Occupant classification system SDM & SDM bracket Front impact sensors Side impact sensors Steering column bracket Steering column & shaft joints Steering wheel Contact coil SIR wiring harness Air bag module(s) Sensing & Diagnostic Module (SDM)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.
1Following frontal impact and air bag module and/or seat belt pretensioner deployment. 2Following side impact and air bag module deployment. Replace side impact sensor on side of deployment. 3Following passenger’s side air bag module deployment. 4Following frontal or side impact with air bag module/seat belt pretensioner deployment. 5Following passenger seat air bag module deployment.

Suzuki-6 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules Sensing & Diagnostic Module (SDM) Deployed seat belt pretensioners Front impact sensors 1 Side impact sensors 2 Instrument panel 3	AIR BAG warning light operation Instrument panel reinforcement Knee bolsters Seat belts & mounting points Seat belt buckle switches Seat position sensor Occupant classification system SDM & SDM bracket Front impact sensors Side impact sensors Steering column bracket Steering column & shaft joints Steering wheel Clockspring SIR wiring harness Air bag module(s) Sensing & Diagnostic Module (SDM)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.
1Following frontal impact and air bag module and/or seat belt pretensioner deployment. 2Following side impact and air bag module deployment. Replace side impact sensor on side of deployment. 3Following passenger’s side air bag module deployment.

Suzuki-7 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules 1 ,2 ,3 Spiral cable 4 Deployed seat belt pretensioners 5 Front impact sensors 6 Side impact sensors 7 Instrument panel 2 Diagnosis sensor unit (control module) 8	AIR BAG warning light operation Instrument panel reinforcement Seat belts & mounting points Seat belt buckle switches Occupant classification system 9 Front impact sensors Side impact sensors Center pillar inner trim Headliner Steering column & shaft joints Steering wheel Air bag module(s)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.
1If the driver or passenger’s side air bag has deployed, replace air bag module and install with new fasteners. 2If the passenger’s side air bag has deployed, replace air bag module and the instrument panel assembly. 3If the side air bag module has deployed, replace seatback assembly. 4If the driver’s side air bag has deployed, replace spiral cable. 5If either the driver or passenger seat belt pre-tensioner has been activated, replace all seat belt pre-tensioner assemblies with new fasteners. 6If any of the front air bags or seat belt pre-tensioners have been activated, replace the front impact sensor and bracket with new fasteners. 7Following side impact and air bag module deployment. Replace side impact sensor on side of deployment with new fasteners. 8If any of the SRS components have been activated, REPLACE the air bag diagnosis sensor unit and install new fasteners. 9If damaged, REPLACE seat cushion assembly with new fasteners.

Suzuki-8 See Suzuki (1995-13) application table
Replace after Deployment	Inspect & if Damaged, Replace Component (Even if Air Bag Did Not Deploy)	Comments
Deployed air bag modules Passenger seat cushion including OCM with sensor mat (with any deployment) Instrument panel (if front air bags deployed) Sensing & Diagnostic Module (SDM) (with any deployment) Front seat belt pretensioners (if front air bags deployed) Front impact sensors (if front air bags deployed, replace both) Side impact sensors (if side air bags, rear side air bags, or head air bags deployed) Rear impact sensors (if side air bags, rear side air bags, or head air bags deployed)	AIR BAG warning light operation Instrument panel & reinforcement Seat belts & mounting points Seat belt buckle switches SDM & SDM bracket Contact coil assembly Front impact sensors Side impact sensors Rear impact sensors Steering wheel Air bag module(s) OCM (Occupant Classification Module) Sensing & Diagnostic Module (SDM)	Manufacturer may consider some fasteners and attachments non-reusable. Refer to manufacturer’s service repair manual or appropriate Air Bag Service & Repair article in Mitchell’s Repair Center TechAdvisor product for more information. If any components are damaged or bent, they must be replaced. DO NOT attempt SRS wiring harness repairs.