|
Included Operations
|
•
|
Position vehicle on alignment rack and check/adjust tire pressure |
|
•
|
Check ride height and adjust to vehicle manufacturer specifications |
|
•
|
Set-up gauges on all 4 wheels and check wheel run out and rear suspension for wear |
|
•
|
Determine vehicle tracking by checking thrust angle to vehicle center line |
|
•
|
Adjust rear caster, camber and toe-in where applicable |
|
•
|
Perform vehicle manufacturer recommended shimming procedures if necessary |
|
•
|
Remove vehicle from alignment equipment |
|
•
|
Verify alignment by road test |
|
Not Included Operations
|
•
|
Diagnostic road test to determine if alignment operations are necessary |
|
•
|
Straighten or replace suspension parts and/or structural components |
|
•
|
Shift or align rear suspension axle assembly carrier and/or housing |
|
•
|
R&I or center steering wheel |
|
•
|
Non-vehicle manufacturer shimming |
|
•
|
Adjust front wheel alignment |
NOTE: If Front Wheel Adjustment is necessary, cancel Adjust Rear Alignment procedure and use Adjust Four Wheel Alignment procedure.
|