Cowl Side & Door Post R&R

 

Included Operations

•    Remove and replace as an assembly
•    Cut in windshield opening and at base of door post
•    Remove and install or replace:

Front Door

Cowl side trim

Weathercords

Weatherstrips

Sill plates

•    Loosen and pull back carpet and insulation as required
•    Remove and replace caulking for standard factory application

                                      IMPORTANT REMINDER: Sectioning of a panel may or may not be recommended by vehicle manufacturer. This procedure should only be performed when a qualified and knowledgeable technician has determined that the operation does not jeopardize the integrity of the vehicle.

Not Included Operations

•    Refinish cowl side and door post
•    Remove and/or apply:

Anti-corrosion rust resistant materials

•    Remove and install or replace:

Front fender

Windshield, seals or mouldings

Restraint systems

Instrument panel, instruments, etc.

•    Trimming of welded assembly to be installed

                                      IMPORTANT REMINDER: No windshield or flush mounted reveal moulding can be removed without the possibility of breakage. Unintentional damage to glass that is considered a structural member by the vehicle manufacturer may occur when attempting alignment pulls to correct unibody collision damage. Agree beforehand who will incur the charge for damage occurring during normal R&R or R&I, and whether additional labor time will be required to perform R&I operations on glass secured by urethane.