Doors/Center Pillar/Rocker & Quarter R&R

Included Operations

•    Remove and replace center pillar, rocker and quarter as an assembly
•    Cut through window opening and at base of front door post, includes wheelhouse
•    Remove and install:

Luggage compartment trim

Cowl side trim

Center pillar trim

Quarter trim

Plastic wheelhouse liner

Door trim panels

Lock cylinder

Sill plates

Seats

Tail lamp

Rear bumper

Filler panel

Stone deflector

Lower valance

Parcel shelf trim

•    Remove and install or replace:

Side and back glass, seals or mouldings

Front and rear doors

Water/dust barriers

•    Loosen and pull back cloth type headliner, carpet and insulation as required
•    Remove and replace caulking for standard factory application

                                      IMPORTANT REMINDER: Sectioning of a panel may or may not be recommended by vehicle manufacturer. This procedure should only be performed when a qualified and knowledgeable technician has determined that the operation does not jeopardize the integrity of the vehicle.

Not Included Operations

•    Refinish doors, center pillar, rocker and quarter panel
•    Remove and/or apply:

Anti-corrosion rust resistant materials

•    Remove and install:

Headliner (all types)

Restraint systems

•    Remove and install or replace:

Fuel tank

Antenna

Control cables (latch release, etc.)

Fluid lines

Mouldings, nameplates, etc.

Suspension assembly

Luggage lid

Outside mirror

•    Replace or transfer parts attached to door (example: outside handle, glass, run channels, regulator, vent assembly, weatherstrip)
•    Recode lock cylinder
•    Remove or replace or loosen rear edge of fender
•    Remove from salvaged assembly:

Interior trim panels

Lock cylinder

•    Trimming of welded assembly to be installed