Back & Corner Side‑Panels R&R

Included Operations

•    Cut in window opening, seam of back panel and base of lock pillar
•    Remove and install:

Seats

Interior trim (base model only)

Sill plates

Lock strikers

Quarter glass, seals or mouldings

•    Remove and replace:

Back glass, seals or mouldings

•    Loosen and pull back cloth type headliner, carpet and insulation as required
•    Remove and replace caulking for standard factory application

                                      IMPORTANT REMINDER: Sectioning of a panel may or may not be recommended by vehicle manufacturer. This procedure should only be performed when a qualified and knowledgeable technician has determined that the operation does not jeopardize the integrity of the vehicle.

Not Included Operations

•    Refinish back and corner panel
•    Remove and/or apply:

Anti-corrosion rust resistant materials

•    Remove and install or replace:

Pickup bed assembly

Headliner (All types)

Restraint systems

Fuel tank

•    Remove from salvaged assembly:

Interior trim panels

•    Trimming of welded assembly to be installed

                                      IMPORTANT REMINDER: No back or quarter glass (if applicable) or flush mounted reveal mouldings can be removed without the possibility of breakage. Agree beforehand who will incur the charge for damage occurring during normal R&R or R&I and whether additional labor time will be required to perform R&I operations on glass secured by urethane.