Quarter & Rocker Panel R&R

 

Included Operations

•    Cut in window openings and rocker panel as necessary, includes wheelhouse
•    Remove and install or replace:

Quarter trim

Plastic wheelhouse liner

Side and back glass, seals or mouldings

Seats

Parcel shelf trim

Cowl side trim

Filler panels, stone deflector, or lower valance panel

Sill plates

Bumper assembly

Lock strikers

Tail lamp

Luggage compartment trim

Water/dust barrier

•    Loosen or pull back cloth type headliner, carpet and insulation as required
•    Remove and replace caulking for standard factory application
•    Loosen convertible top at quarter

                                      IMPORTANT REMINDER: Sectioning of a panel may or may not be recommended by vehicle manufacturer. This procedure should only be performed when a qualified and knowledgeable technician has determined that the operation does not jeopardize the integrity of the vehicle.

Not Included Operations

•    Refinish quarter and rocker panel
•    Remove and/or apply:

Anti-corrosion rust resistant materials

•    Remove and install or replace:

Headliner (All types)

Restraint systems

Suspension assembly

Luggage lid

Antenna

Liftgate

Fuel tank

Control cables (latch releases, etc.)

Fluid lines

Mouldings, nameplates, etc.

Wheel

•    Remove from salvaged assembly:

Interior trim panels

•    Trimming of welded assembly to be installed

                                      IMPORTANT REMINDER: No back or quarter glass (non-movable) or flush mounted reveal mouldings can be removed without the possibility of breakage. Agree beforehand who will incur the charge for damage occurring during normal R&R or R&I and whether additional labor time will be required to perform R&I operations on glass secured by urethane.