Overlap

Deduct .4 hour from refinish time for each ADJACENT MAJOR PANEL or ASSEMBLY and deduct .2 hour from time for each NON-ADJACENT MAJOR PANEL orASSEMBLY. There is no overlap deduction taken for the first major panel or assembly.

Adjacent major panel or assembly example: Front sheet metal 8.5 hours (full time) and right front door 2.5 hours minus .4 hour overlap for a total of 10.6 hours.

Non-adjacent major panel or assembly example: Front sheet metal 8.5 hours (full time) and right rear door 2.5 hours minus .2 hour overlap for a total of 10.8 hours.

No overlap deductions for valance panel, pillars, inner panels, filler panels, soft bumper covers or bolt-on finish panels.