Clear Coat/Two Stage Refinish

 

First major panel, assembly or soft bumper/fascia cover:

Add .4 per refinish hour (40%), then add .4 per refinish hour for jamb, jamb and interior, edge panel, and/or underside (when necessary).

Additional panel(s), assembly(s) and/or other refinish area(s):

Deduct overlap (if applicable); add .2 per refinish hour (20%), then add .2 per refinish hour for jamb, jamb and interior, edge panel, and/or underside (when necessary).

Included Operations

•    Mix material
•    Clean and tack surface
•    Apply material
•    Clean equipment

                                         NOTE: Some OEMs now utilize a matte clear coat on non-exterior colors applied to undersides, edges, and/or jambs.

Included Operations

•    Clean and tack surface
•    Apply material