Roof Panel R&R

Included Operations

Remove and install: Rear or lift gate, Front and rear seats (Passenger/Pickup vehicles), Front seats (Van/Utility vehicles), Quarter trim
Remove and replace: Windshield and mouldings, Back window and mouldings, Quarter windows and mouldings if necessary, Sunroof assembly
Remove and install or replace: Headliner (all types), sun visors, dome lamps, grip handles and coat hooks
Replace clip type moulding for base model vehicle (example: roof rail, drip rail)
Remove and replace caulking for standard factory application

Not Included Operations

Refinish roof panel
Remove and/or apply: Anti-corrosion rust resistant materials
Remove and install or replace: Luggage rack, Roof cap and/or vinyl cover, Wiring and/or wiring harness, Sound deadening material, Non-base model interior trim and/or rear seating (Van/Utility vehicles)
Replace new adhesive exterior trim; deduct one-half of R&R time
Install stripes, decals, transfers or overlays
Broken glass clean up

IMPORTANT REMINDER: No windshield, back or quarter glass (if applicable), or flush mounted reveal mouldings can be removed without the possibility of breakage or damage that will require replacement. Unintentional damage to glass that is considered a structural member by the vehicle manufacturer may occur when attempting alignment pulls to correct unibody collision damage. Agree beforehand who will incur the charge for damage occurring during normal R&R or R&I operations.