Lock Pillar, Side or Corner Panel
Included Operations
|
•
|
Remove and install: Sill plates, Front and/or rear seats |
|
•
|
Remove and replace urethane set glass: Quarter window and moulding |
|
•
|
Remove and install or replace: Non urethane set glass (Quarter window and moulding), Lock striker |
|
•
|
Remove caulking/seam sealer for panel R&R. Replacement of caulking/seam sealer to obtain water sealing properties of the panel seams
|
|
•
|
Loosen and pull back carpet and/or insulation as required |
|
•
|
Replace clip type moulding for base model vehicle |
Not Included Operations
|
•
|
Refinish pillar, side or corner panel |
|
•
|
Remove and/or apply: Anti-corrosion rust resistant materials |
|
•
|
Remove and install bed assembly |
|
•
|
Remove and install or replace: Back window and moulding, Interior trim |
|
•
|
Remove undamaged urethane set glass: Quarter window and moulding (See Example Below) |
|
•
|
Replace sound deadening |
|
•
|
Remove and install adhesive exterior trim; add to clean and retape |
|
•
|
Replace new adhesive exterior trim; deduct one-half of R&R time |
|
•
|
Apply caulking/seam sealer for additional sound deadening and/or to replicate original factory appearance, texture or color
|
|
•
|
Install stripes, decals, transfers or overlays |
|
•
|
Drill holes for installing exterior trim |
IMPORTANT REMINDER: No back or quarter glass (if applicable), or flush mounted reveal mouldings can be removed without the possibility of breakage or damage that will require replacement. Agree beforehand who will incur the charge for damage occurring during normal R&R and R&I operations.
Example: A Panel allowance includes a backglass R&R of 2.0 hr. The R&I of the backglass is 2.3 hr. The difference of .3 hr. between backglass R&R (2.0 hr.) and R&I (2.3 hr.) has not been factored into the panel allowance.
Side or Corner Panel Sectioning Explanation:{Italic}see
IMPORTANT REMINDER: Sectioning of a panel may or may not be recommended by vehicle manufacturer. This procedure should only be performed when a qualified and knowledgeable technician has determined that the operation does not jeopardize the integrity of the vehicle.