Back Panel R&R

Included Operations

Remove and install: Front and/or rear seats
Remove and replace urethane set glass: Back window and moulding
Remove and install or replace: Non urethane set glass (Back window and moulding)
Remove caulking/seam sealer for panel R&R. Replacement of caulking/seam sealer to obtain water sealing properties of the panel seams
Loosen and pull back carpet and/or insulation as required

Not Included Operations

Refinish back panel
Remove and/or apply: Anti-corrosion rust resistant materials
Remove and install bed assembly
Remove and replace: Interior trim
Remove undamaged urethane set glass: Back window and moulding (See Example Below)
Remove and install or replace: Headliner (all types)
Replace sound deadening
Remove and install adhesive exterior trim; add to clean and retape
Remove and install adhesive exterior trim; deduct one-half of R&R time
Install stripes, decals, transfers or overlays
Apply caulking/seam sealer for additional sound deadening and/or to replicate original factory appearance, texture or color
Drill holes for installing exterior trim
Broken glass clean up

Example: A Back Panel allowance includes a Back Glass R&R of 2.0 hr. The R&I of the back glass is 2.3 hr. The difference of .3 hr. between Back Glass R&R (2.0 hr.) and R&I (2.3 hr.) has not been factored into the Back Panel allowance.

IMPORTANT REMINDER: Labor times for inner panels, rails or reinforcements are with outer panels removed. No back, quarter glass (non-movable) or flush mounted reveal mouldings can be removed without the possibility of breakage or damage that will require replacement. Unintentional damage to glass that is considered a structural member by the vehicle manufacturer may occur when attempting alignment pulls to correct unibody collision damage. Agree beforehand who will incur the charge for damage occurring during normal R&R or R&I operations.