Clear Coat/Two Stage Refinish

First major panel or soft bumper/fascia cover: Add .4 per refinish hour (40%), then add .4 per refinish hour for jamb, jamb and interior, edge panel, and/or underside (when necessary).

Included Operations

•

Mix material

•

Clean and tack surface

•

Apply material

•

Clean equipment

NOTE: Some OEMs now utilize a matte clear coat on non-exterior colors applied to undersides, edges, and/or jambs.

Additional panel(s) and/or other refinish area(s): Deduct overlap (if applicable); add .2 per refinish hour (20%), then add .2 per refinish hour for jamb, jamb and interior, edge panel, and/or underside (when necessary).

Included Operations

•

Clean and tack surface

•

Apply material

NOTE: For NEW, UNDAMAGED PARTS, a total of no more than 2.5 hours should be necessary to perform the four Clear Coat Refinish Included Operations listed above. This calculation DOES NOT APPLY to bumper covers, ground effects, special package equipment, interior edges, jambs, entryways, undersides and additional time that may be required for repaired and/or used panels. It DOES NOT APPLY to complete vehicle refinish. It is not intended to determine the quantity or cost of materials required for the application of clear.