Hinge and/or Windshield Pillar R&R
Included Operations
|
•
|
Remove and install or replace: Sun visor, if replaced at roof, Roof rail moulding, if replaced at roof, Sill plates, Jamb switches |
|
•
|
Loosen and pull back: Front area of cloth type headliner, Carpet and insulation as required |
Remove caulking/seam sealer for panel R&R. Replacement of caulking/seam sealer to obtain water sealing properties of the panel seams
Not Included Operations
|
•
|
Remove and/or apply: Anti-corrosion rust resistant materials |
|
•
|
Remove and install: Door, Front fender |
|
•
|
Remove and install or replace: Windshield and mouldings, Instrument panel assembly, Door hinges, Air conditioning and heater parts that interfere, Wiring and/or wiring harness |
|
•
|
Remove and install preformed or molded type headliner |
Apply caulking/seam sealer for additional sound deadening and/or to replicate original factory appearance, texture or color
IMPORTANT REMINDER: No windshield or flush mounted reveal mouldings can be removed without the possibility of breakage or damage that will require replacement. Unintentional damage to glass that is considered a structural member by the vehicle manufacturer may occur when attempting alignment pulls to correct unibody collision damage. Agree beforehand who will incur the charge for damage occurring during normal R&R and R&I operations.