Frame Assembly R&R |
|
|
Included Operations Remove and install: Front and rear bumpers Front sheet metal as an assembly Hood Body assembly Coach Exhaust system Spare tire (when attached to frame) Mechanical assemblies (example: engine, transmission, suspension, fuel tank, differential and components) Remove and install or replace: Radiator Wiring and/or wiring harness if necessary Fluid lines Engine mounts/absorbers Vapor canister Clips and bolted brackets attached to frame Frame Assembly R&R requires planning. Proper preparation and job sequencing are key to performing this operation. Also, special equipment, additional work space and manpower may be needed. |
Not Included Operations Overhaul assemblies or replace parts of assemblies that are transferred Remove and install: Seats Interior trim if necessary Remove and install or replace: Welded or riveted assemblies of the frame (see Note) Optional accessories (example: auxiliary lamps and fuel tanks, brush guard, trailer hitch, trailer connector) Wheel alignment Adjust control linkage Bleed brakes if necessary Evacuate and recharge air conditioning if so equipped and necessary Refrigerant recovery if necessary Pull back carpet as required It may be necessary to transfer parts from the damaged frame or order new parts to use on the new frame. This cannot be determined until you see the new frame. The needed additional time for this operation must be estimated. |
|
Mitchell Support: |
|