Adjust Four Wheel Alignment |
|
|
Included Operations Position vehicle on alignment rack and check/adjust tire pressure Check ride height and adjust to vehicle manufacturer specifications Set-up gauges on all 4 wheels and check wheel run out and suspension for wear Determine vehicle tracking by checking thrust angle to vehicle center line Center steering wheel Adjust front and rear caster, camber and toe-in where applicable Perform vehicle manufacturer recommended shimming procedures if necessary Remove vehicle from alignment equipment Verify alignment by road test |
Not Included Operations Diagnostic road test to determine if alignment operations are necessary Straighten or replace suspension parts and/or structural components Shift or align engine subframe/crossmember and/or axle housing Shift or align rear suspension axle assembly, carrier and/or housing Remove and install steering wheel Non-vehicle manufacturer shimming Adjust wheel bearings |
|
Mitchell Support: |
|