Adjust Rear Alignment |
|
|
Included Operations Position vehicle on alignment rack and check/adjust tire pressure Check ride height and adjust to vehicle manufacturer specifications Set-up gauges on all 4 wheels and check wheel run out and rear suspension for wear Determine vehicle tracking by checking thrust angle to vehicle center line Adjust rear caster, camber and toe-in where applicable Perform vehicle manufacturer recommended shimming procedures if necessary Remove vehicle from alignment equipment Verify alignment by road test |
Not Included Operations Diagnostic road test to determine if alignment operations are necessary Straighten or replace suspension parts and/or structural components Shift or align rear suspension axle assembly carrier and/or housing Remove and install or center steering wheel Non-vehicle manufacturer shimming Adjust wheel bearings Adjust front wheel alignment If Front Wheel Adjustment is necessary, cancel Adjust Rear Alignment procedure and use Adjust Four Wheel Alignment procedure. |
|
Mitchell Support: |
|