Cab/Roof Panel R&R |
|
|
Included Operations Remove and install: Front seats Pillar trim Remove and replace: Windshield and mouldings Remove and install or replace: Headliner (all types), sun visors, dome lamps, grip handles and coat hooks Weathercords, weatherstrip and retainers Replace clip type moulding for base model vehicle (example: roof rail, drip rail) Remove and replace caulking for standard factory application |
Not Included Operations Refinish roof panel Remove and/or apply: Anti-corrosion rust resistant materials Remove and install or replace: Luggage rack Roof cap and/or vinyl cover Wiring and/or wiring harness Sound deadening material Non-base model interior trim and/or rear seating Replace roof rails and header panels Remove and install adhesive exterior trim; add to clean and retape Replace new adhesive exterior trim; deduct one-half of R&R time Install stripes, decals, transfers or overlays Broken glass clean up No windshield or flush mounted reveal mouldings can be removed without the possibility of breakage or damage that will require replacement. Unintentional damage to glass that is considered a structural member by the vehicle manufacturer may occur when attempting alignment pulls to correct unibody collision damage. Agree beforehand who will incur the charge for damage occurring during normal R&R or R&I operations. |
|
Mitchell Support: |
|