|
Included Operations Solvent wash Scuff panel and clean Mask adjacent panels up to 36 inches Prime or seal as required Final sanding and clean Mix materials Adjust spray equipment Apply color Clean equipment The included operation of mask adjacent panels is inclusive of any necessary back tape masking to prevent overspray. Refinish times are for NEW, UNDAMAGED PARTS without exterior or interior trim or attached components. Refinish times may vary depending on individual procedures, product and/or weather conditions. A small percentage of colors are identified by the paint manufacturers as highly transparent. These colors may require additional application coats to achieve visual hiding. In instances where four or more color coats are necessary to achieve adequate hiding, some adjustment in refinish times may be appropriate.
|
Not Included Operations Blending into adjacent panel and/or panels, or nearest breaking point Color match or tinting Applying anti-corrosion rust resistant materials Finish sand and buff Mask interior to prevent overspray damage Removal of protective coatings Removal of release agent from OEM raw plastic components (example: non-primed bumper covers) Featheredge paint damage to adjacent panel and/or panels joined by welding Gravel guard refinish; add .5 hour for the first major panel and .3 hour for each additional panel. The cost of paint and materials is not included in refinish time. Gravel Guard application and appropriate refinish may be necessary beyond the actual replacement area to achieve a “texture” match. It may be necessary to tint or otherwise modify non-exterior colors applied to undersides, edges and/or jambs for which there is no paint color formula to achieve a color match. When necessary, reference “color match or tinting” listed above in Not Included Operations. |
|
Mitchell Support: |
|