Inner Structure Assembly R&R
Included Operations
|
•
|
Remove and install: Cowl trim |
|
•
|
Remove and install or replace: Shroud and radiator assembly, Impact absorbers or mounting arms if necessary to perform operation, Cowl top panel if assembly includes dash panel |
|
•
|
Loosen and pull back carpet and insulation as required |
|
•
|
Remove caulking/seam sealer for panel R&R. Replacement of caulking/seam sealer to obtain water sealing properties of the panel seams
|
Not Included Operations
|
•
|
Refinish radiator support, apron and/or front rail |
|
•
|
Remove and/or apply: Anti-corrosion rust resistant materials |
|
•
|
Remove and install: Front bumper, Hood panel, Front header panel, Front fenders, Engine, Wiring and/or wiring harness |
|
•
|
Remove and replace: Radiator hoses, Fan, pulley, fan clutch or belts, Decals (example: EPA, body identification, caution/danger) |
|
•
|
Remove and install or replace: Suspension assemblies, Bolted parts and assemblies (example: fluid reservoirs and coolers, vapor canister, cruise control, air conditioning components), Instrument panel and center console, Seat assemblies, Windshield and mouldings, Air safety bag |
|
•
|
Apply caulking/seam sealer for additional sound deadening and/or to replicate original factory appearance, texture or color
|
IMPORTANT REMINDER: Labor times for inner panels, rails or reinforcements are with outer panels removed.
IMPORTANT REMINDER: Sectioning of a panel may or may not be recommended by vehicle manufacturer. This procedure should only be performed when a qualified and knowledgeable technician has determined that the operation does not jeopardize the integrity of the vehicle.