Procedure 13—Windshield
Windshield R&R
Included Operations
|
•
|
Remove and replace: Reveal mouldings, Garnish mouldings, Wiper arms, Rear view mirror |
|
•
|
Replace weatherstrip if so installed |
|
•
|
Replace necessary adhesive/urethane |
|
•
|
Clean up old adhesive in opening area |
Not Included Operations
|
•
|
Remove and replace: Aftermarket window tint |
IMPORTANT REMINDER: Urethane set glass may typically be considered a structural component. Refer to OEM replacement procedures for installation methods and materials necessary to restore structural integrity.
IMPORTANT REMINDER: No windshield or flush mounted reveal mouldings can be removed without the possibility of breakage or damage that will require replacement. Unintentional damage to glass that is considered a structural member by the vehicle manufacturer may occur when attempting alignment pulls to correct unibody collision damage. Agree beforehand who will incur the charge for damage occurring during normal R&R and R&I operations.